321257
12
Zoom out
Zoom in
Previous page
1/14
Next page
12
Maintenance Centrino cleancontrol
3.4 Cleaning / changing the motor
protection filter
1. Switch off the appliance, remove the dust
container and empty it ZChapter 3.1,
"Emptying the dust container".
2. Remove the motor protection filter from its
holder (Fig. 13).
3. Tap the remaining dust into a dustbin.
4. Rinse the motor protection filter with cold
water until the runoff from the filter is clear
(Fig. 14). However, replace a heavily soiled
or damaged motor protection filter with a
new one.(ZChapter 5.1, "List of
consumable parts")
5. Leave the motor protection filter to dry at
room temperature for at least 15 hours
(Fig. 15).
6. Do not put the filter back into its holder
before it is completely dry.
3.5 Cleaning / changing the central
laminar filter
1. Switch off the appliance, remove the dust
container and empty it ZChapter 3.1,
"Emptying the dust container".
2. Remove the lid of the dust container by
turning it counter-clockwise (Fig. 16/1.,2.).
3. Then twist the central laminar filter off the
cover by turning it counter-clockwise
(Fig. 17/1.,2.).
4. Hold the central laminar filter over a dustbin
and only then separate the filter elements
from each other.
5. For a rough cleaning, tap the dirt from both
parts by lightly tapping on all sides.
6. To thoroughly clean the central laminar
filter without water, use the supplied
furniture brush as shown (Fig. 18).
7. Push the elements of the central laminar
filter together again.
8. If your central laminar filter is equipped with
the optional sheath, take care that the
upper edges of sheath and filter are exactly
flush when fitted (Fig. 19)..
9. Refit the central laminar filter to the dust
cover of the dust container by tightening it
clockwise (Fig. 20).
10. Put the cover back on the dust container
and lock by turning it clockwise. Take care
that the release catches for dust cover and
bottom plate correspond when fitting them
(Fig. 21).
11. Replace the dust container It must catch
with a click.
13
14
15
16
17
18
NOTE:
If the elements of the central laminar filter
are still dirty after a thorough dry cleaning,
thoroughly rinse them with a shower-head.
Do not use detergents or brushes with hard
bristles for this task. Then leave the filter
elements to dry (approx. 15 hrs at room
temperature). Only reassemble them when
they are completely dry.
19
20
21
Centrino_Cleancontrol.book Seite 12 Mittwoch, 16. September 2009 3:03 15
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil m 2881 9 centrino clean control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil m 2881 9 centrino clean control in the language / languages: English, German, Dutch, French, Turkish, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info