ENG-14
Press MENU to cancel setting and return to previous menu.
4.2 Playback
In playback mode, images or videos can be viewed, deleted. The images and
videos can be viewed on: LCD screen on camera and TV monitor which connect
to camera with TV cable. For simplicity, operations with PC won’t be introduced
here.
4.2.1 Viewing Photo or Video
a) Switch to TEST mode and enter into info display.
b) Press right the select switch to view the latest picture (or video) in LCD
screen on camera, TV monitor or Image viewer with TV-in connector.
c) Press Left to start playing the video when viewing.
d) Press Left again to stop playing the video.
e) Press UP to view the previous picture (or video) and DOWN for the next.
f) Press down the select switch to return to info display.
When viewing images, the total number of all images in the SD-card and the index
of the displaying image will be shown respectively.
4.2.2 Delete Photo or Video
The operations are as following:
a) Press Right to display Photos and Videos.
b) Press Menu to select Delete.
c) Press right to select delete current or delete all.
d) Press OK, Cancel and OK are prompted.
e) Press OK to delete the image or video.
Press cancel to cancel, then press MENU and press down the select switch to
return to info display.
Please note that after deleting a picture or a video file, the deleted files can’t be
restored! Furthermore, in order to delete all the images and video clips in the
SD-card, it is suggested to format the SD-card
4.3 File Numbering
Images and videos are separately saved in the pre-named folder (104MEDIA).
File numbering continues by adding one to the last number for each new image or
video. The saving name is like PTDC0001.JPB or PTDC0001.AVI. Through the
suffix you can distinguish whether the file is an image(with suffix.jpg)or a
video(with suffix.avi).
4.4 Firmware Upgrade
This camera is equipped with an automatic upgrade function for you. Upgrading is
needed only when an improved firmware is available. The operations are as
following:
1. Unzip the update file.
2. Copy the FW18NA.bin to SD card.
3. Insert the SD card into the camera.
4. Power on the camera (Test Mode).
5. The camera will read it and update itself automatically. When updating the
camera, its screen is black.
6. The screen will light on after being finished.
7. Plug out the SD card, then insert it into pc, delete the FW18NA.bin in the
SD card (If you don't do this, the camera will enter update mode when
power on again).
8. Insert the SD card into the camera for its working.
