695139
7
Zoom out
Zoom in
Previous page
1/8
Next page
CAUTION:
Switch the device to a different operating mode before you remove the USB storage device
Description of the control buttons
NOTE:
Not all the functions may be supported depending on the playback device.
ENTER / PLAY / PAUSE / CLOCK
• You can briefly interrupt and resume playback using this button. The display shows the elapsed playback time flashing.
Pressing again continues playback.
• Press and hold this button during operation to briefly display the current time.
SKIP+ & SKIP-
With “SKIP+ / TUNING+” button you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to search through the tracks.
The “SKIP- / TUNING-” button can be used as follows:
Press once = This starts the current track again from the beginning.
Press twice = This jumps back to the previous track.
STOP
The playback is stopped.
Volume
You can set the desired volume with the “VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” button.
MODE
• In stop mode for programming any order of tracks (see the section on “Programmed Play”).
During the playback of an audio CD:
Press once = the normal play mode.The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat ONE”.
Press three times = the whole CD is played continuously. The display will show “Repeat ALL”.
Press four times = all tracks will be played in random order. The display will show “Random”.
Press five times = back to the normal play mode.
During playback of MP3 music(Under USB mode):
Press once = the normal play mode.The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat ONE”.
Press three times = the selected folder is repeated continuously. The display will show “Repeat FOLDER”.
Press four times = the whole CD is played continuously. The display will show “Repeat ALL”.
Press five times = all tracks will be played in random order. The display will show “Random”.
Press six times = back to the normal play mode.
PRE. /FOLDER
1. Use the “PRE. / FOLDER” to enter the enter the mode.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the “STOP” button.
2. Press the "AMS / MODE" button. “P_01” will start to flash..
P_01 means the storage space
Use the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to select the desired track and then press the "AMS / MODE"
button again.
The display “P-01” will be changed to “P_02”.
3. Select the next track with the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons and press the "AMS / MODE" button
again. Repeat the procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached “PROGFULL” will show in the display.
4. Press the “ENTER / PLAY / PAUSE / CLOCK” button. The playback starts.
The upper-left of the display will show “MEM”.
5. Press once the button to stop the playback while retaining the program.
6. To play the programmed back again, press the “ENTER / PLAY / PAUSE / CLOCK” button.
7. To delete the program, press the “STOP” button twice. The notification “MEM” will disappear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on these CDs. Your machine detects an
MP3 CD automatically (the total number of tracks and MP3s appears in the display). If you would like to play one of these
CDs, proceed as described under “Playing CDs/MP3”. Tracks can be programmed as described under “Playing Back
Programmed Tracks”.
AUX IN socket
Via this socket you can also hear the sound of other playback devices such as MP3 players, CD players etc. through the
loudspeakers.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.
2. Repeatedly press the “STANDBY / FUNCTION” button, until “AUX” is shown in the display.
3. You will hear the sound playback from the external device through the loudspeakers. You may adjust the volume with
“VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” buttons. The CD buttons are not functional.
4. For the remaining procedure please see the operating instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable level.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver TDA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver TDA-60 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver TDA-60

Denver TDA-60 User Manual - German - 11 pages

Denver TDA-60 User Manual - Dutch - 11 pages

Denver TDA-60 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info