695139
5
Zoom out
Zoom in
Previous page
1/8
Next page
• BUZZ:
A buzzer will sound when reaching the alarm time.
6. Finally, press the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons to set the alarm volume. Press the “VOLUME- /
ALARM 1” to confirm.
To set the second alarm time, repeat each of the above steps with the “VOLUME+ / ALARM 2” button.
In order to deactivate the alarm function, press the “VOLUME- / ALARM 1” or “VOLUME+ / ALARM 2” button.
Snooze
The automatically set alarm function can be switched off for 9 minutes with the “SLEEP / SNOOZE” button.
Sleep
1. Press the “SLEEP / SNOOZE” button to enter.
2. Press the SLEEP / SNOOZE” buttons to set SLEEP time (120, 110, 100。。。10, 5, OFF) and press “ENTER /
PLAY / PAUSE / CLOCK” button to confirm.
3. To cancel SLEEP, follow above step 1 to 2 and set the SLEEP time to “OFF”.
Listening to the DAB
1. Select the DAB mode with the “STANDBY / FUNCTION” button, until “DAB” is shown in the display.
2. The device automatically searches for DAB stations.
3. You can select the next or the previous station by using theSKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
NOTE:
• If the reception is too weak, try to improve the reception by changing the position of the antenna.
Scan DAB station
1. Press the “STANDBY / FUNCTION” button, until “DAB” is shown in the display.
2. Keep the “AMS / MODE” button pressed. The device will start the station scan.
Save Station
1. If you have found the desired station, press the “AMS / MODE” button. The first preset location appears on the display. If
the preset location is still empty the word EMPTY appears under PRESET STORE.
2. For choosing the memory position, please press SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons.
3. Press the “ENTER / PLAY / PAUSE / CLOCK” button to save the settings.
Select a preset station
1. Press the “PRE. / FOLDER” button to choose a memory position.
Display additional DAB information
In DAB mode, you can display the following additional information if broadcast by the radio station. To do so, press the
“INFO” button.
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves complementary data. This content may be e.g. Information about the
station or the music title and artist being played. If information on the track title is transmitted by the station, you can display
this information with the “INFO” button.
• Displays the received signal strength.
• This indicates the station category (e.g. Pop-Music, News etc.).
• Displays the name of the station group.
• Frequency of the current radio station.
• The “SIGNAL ERROR” display shows the signal quality.
The lower the adjacent figure, the better the quality.
• Displays the digital Audio Bit Rate.
• Display the time.
• Display the date.
Listening to the FM Radio
1. Select the RADIO mode with the “STANDBY / FUNCTION” button, until “FM” is shown in the display.
2. For FM reception: Completely extend the telescopic antenna. Change its position to improve the reception.
3. There are two options to search for and preset radio stations.
• Automatic scan:
Important! Any preset radio stations will be overridden.
Press and hold the "AMS / MODE" button for approx.3 seconds. The system scans the entire frequency band for radio stations.
Any stations found will be preset from lowest to highest frequency.
•Manual scan for audio stations:
Briefly press the “SKIP+ / TUNING+” & “SKIP- / TUNING-” buttons, until you have found the radio station which you are
looking for. If you keep one of the buttons pressed down, the device will search to the previous, respectively next radio station.
Preset station:
1. Press and hold the "AMS / MODE" button on unit for about 2-3 seconds to start the automatic preset process.
2. Display will show the memory sequence number and radio stations will be automatically preset into the sequence number
(Note: Each sequence number means 1 preset station while during automatic preset process.)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver TDA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver TDA-60 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver TDA-60

Denver TDA-60 User Manual - German - 11 pages

Denver TDA-60 User Manual - Dutch - 11 pages

Denver TDA-60 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info