584591
16
Zoom out
Zoom in
Previous page
1/18
Next page
Turning the Power On
1
PresssPOWER.
The power indicator lights red and the power is set to the
standby mode.
2
Press ON/STANDBY.
The power indicator flashes in green for several seconds and the
power is turned on.
Select the channel to display on
the channel level meter
PresssMETER.
The indicator of the selected channel meter turns green and the
output level of the selected channel is indicated on the meter.
L channnel meter select button
:
Center channnel meter select button
:
R channnel meter select button
:
Set the channel level meter
Set ON/OFF of all channel level meters.
Press METER ON/OFF.
ON
: The channel level meter is illuminated and the channel
level meter operates.
OFF
: The channel level meter illumination and the channel
meter indicator turn off and the channel level meter
does not operate.
The PRE AMP CONTROL LINK indicator goes off if set to ”OFF” with
the AVP-A1HDCI connected to the control link.
POWER METER
ON/STANDBY
METER ON/OFF
[Front panel]
Operations
Channels for which Input select switch is set to OFF” are skipped.
In the case of bi-amp connection, the indicator of the input-side
channel meter of the selected channel pair turns green.
In the case of a bridge connection, the indicator of the channel meter
of the selected channel pair turns green.
Turning the Power Off
q Press ON/STANDBY.
The power is set to the standby mode.
w Press POWER.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press POWER to turn off the power, or
unplug the power cord from the power outlet.
NOTE
Before tuning on the power, lower the sound volume of the connected
equipment.

Getting Started Connections and Settings Operations Troubleshooting
1.POA-A1HDCIEU.indd 16 2008/01/18 11:07:28
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-A1HDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-A1HDCI in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info