7
ENGLISH
5
FADER START
If the separately sold DN-1800F, DN-2100F and DN-2600F players are connected to CH-3 or CH-4, they can be started using the
source input fader (Ch. fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.
Channel Fader Start
Turn on the Ch. fader start switch.
Move the source input fader (Ch.
fader) of CH-3 or Ch-4 control all
the way to the bottom.
DN-1800F
Set the cue point on either drive.
DN-2100F and DN-2600F
Set the A-1 or A-2 point on either drive.
When you want to start the
player, move up the source input
fader (Ch. fader) and the CD
player will begin playing.
NOTES:
• Channels selected with the Crossfader Assign A, B
switches and the Crossfader Start A, B buttons cannot
be started with the source input fader (Ch. fader).
• Ch. Fader Start and Cross Fader Start for the same
source will not operate simultaneously. You must select
from either one. If both Ch. Fader and Cross Fader
switches are ON, priority will be the cross fader.
1
2
3
4
Using the Crossfader Assign A B switches, select
the channel (CH-3 or CH-4) that the CD player is
connected.
Press the Crossfader Start A, B buttons of the
channel connected to the CD player to be controlled.
Slide the Crossfader all the way in direction opposite
the source you want to start. ( In the following
example, startup is done with the CD player
connected to CH-3 set to Assign A. )
DN-1800F
Set the cue point on the left drive.
DN-2100F and DN-2600F
Set the A-1 or A-2 point on the left drive.
1
2
3
4
Crossfader Start
Use the Crossfader Contour control to control the
cross fader startup curve.
5
When the Crossfader is slid in the opposite direction
as in “3”, CD player play will begin.
6
