614628

Denon DN-X1700 Manual

13
Zoom out
Zoom in
Previous page
1/26
Next page
9
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Effector Function
The unit comes with 2 independent effectors which are linked to the number of beats which has been set
in synchronization with the number of beats per minute (BPM) of the musical compositions. It also has
an effect send confi guration which makes it possible to send the signals of a multiple number of input
channels simultaneously to the effectors. As a result, it can give presentations based on effect groups by
effector A and effector B, add the effects which are produced by the 2 effectors and which differ between
channel input and master output, and present a wide range of other acoustic effects as well.
Types of effects and details of operations
No. Effect Description of effect operation
1 Delay Adds signals which have been delayed by the time of the beat setting.
2 Echo Adds echo signals which have been delayed by the time of the beat setting.
3 Trans Cuts off the signals at the time of the beat setting.
4 Flanger
Adds signals whose delay time has been varied in the LFO period of the beat
setting.
5 Filter Varies the fi lter cut-off frequency using the beat setting time.
6 Phaser
Adds signals whose phase has been varied in the LFO period of the beat
setting.
7 Reverb
Adds reverberation signals which have been delayed by the time of the beat
setting.
8 Loop
Initiates the same kind of loop sampler processing as the LOOP function of
other Denon DJ products.
9 Rev. Loop Initiates the reverse play processing of the above loop signals.
10 Pitch Shift
Initiates the pitch shift processing of the input signals, and outputs the
results.
11 BeatBreaker
Initiates the partial insertion processing of the attack sounds of the beats as
per the beat pattern.
12 SEND/RTN
Sends the signals whose effects have been selected to the external effector
and returns the signals from the external effector.
* EFX 1 and EFX 2 cannot be selected at the same time.
* In order to achieve normal effects, set the BPM value that matches the number of beats of the musical
compositions.
BeatBreaker Function
1. What the BeatBreaker effector does
This effector breaks down the music signals in each bar obtained from the BPM value a quarter beat at
a time into 16 sections, replaces these sections with a preset beat pattern, and then plays them back to
achieve an effect where the beat of the original musical composition is changed.
2. Details of operation
The beat patterns consist of 16 blocks, and when these blocks are lighted, the sound is being replaced
by the initial sound of the beat.
When this
effect is ON, the block being played lights up blue.
Example:
q
w
e
Pattern
Snare
Kick
Snare
Kick
In the case of pattern q shown in the figure, when the music signals w are input, the sound of signals
e, which are produced by replacing the sound of the first quarter beat with the lighted section, are
output.
3. Operation method
Using the
Effect ON/OFF buttons, the effect with the timing when the buttons were set to ON at the
beginning is added. The beat pattern is selected using the
BEAT , buttons.
In the Utility mode, fi ve user presets can be created.
Effector Function
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1700 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X1700

Denon DN-X1700 User Manual - German - 26 pages

Denon DN-X1700 User Manual - Dutch - 26 pages

Denon DN-X1700 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info