614629
11
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
Getting Started Connections Specifications
Source input fader (Ch. Fader)
1
Turn the INPUT ASSIGN switch to select the desired
source from LINE2, 4, 6 or 8.
2
Turn on the CH FADER START switch.
b CROSS FADER ASSIGN position is “THUR”.
3
Move the source input fader (Ch. Fader) of CH-1, CH-
2, CH-3 or CH-4 control all the way to the bottom.
4
Set the standby mode on CD player.
5
Use the CH FADER CONTOUR control to control the
channel fader startup curve.
6
When you want to start the player, move up the source
input fader (Ch. Fader) and the CD player will begin
playing.
Channel Fader Start
Crossfader
CROSSFADER CONTOUR
CROSSFADER START A
CROSSFADER START B
CROSSFADER ASSIGN
Crossfader
1
Turn the INPUT ASSIGN switch to select the desired
source from LINE2, 4, 6 or 8.
2
Using the CROSSFADER ASSIGN switch, assign the
channel or Sampler source into A or B of Crossfader.
3
Turn on the CROSSFADER START A, B switches.
4
Slide the Crossfader all the way in direction opposite
the source you want to start. (In the following example,
startup is done with the CD player connected set to
Assign A.)
5
Set the standby mode on CD player.
6
Use the CROSSFADER CONTOUR control to control
the cross fader startup curve.
7
When the Crossfader is slid in the opposite direction,
CD player play will begin.
Crossfader Start
Replacing the Crossfader
The Crossfader may be removed without disassembly of DN-X1100
itself.
1
Pull out the Crossfader knob.
2
Removed the ve outer screws attaching the
crossfader plate.
3
Remove the two screws attaching the crossfader
bracket assembly from chassis.
4
Pull the crossfader bracket assembly forward and
unplug the 3P cable from the connector on the panel
board.
Fader Start
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1100 in the language / languages: English as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info