614629
9
Zoom out
Zoom in
Previous page
1/14
Next page
Getting Started Fader Start
ENGLISH
Specifications
Cables Used for Connections
Select the cables according to the equipment being
connected.
Preparations
Connections
NOTE
Always switch on your audio input sources such
as CD players first, then your mixer, and finally
any amplifiers.
When turning off, always reverse this operation
by turning off amplifiers, then your mixer, and
then input units.
Refer to the Connection Diagram below.
1. Make certain AC power is off while making
connections.
2. Quality cables make a big difference in fidelity
and punch. Use high-quality, audio cables.
3. Do not use excessively long cables.
Be sure plugs and terminals are securely
fastened. Loose connections cause hum,
noise, or intermittence that could damage your
speakers.
4. Connect all stereo input sources. Then connect
any effects into the stereo Effect, if used.
Connect your Microphone(s) and monitor
headphones. Make sure all faders are at “zero”
and the unit is off. Take care to connect only
one cable at a time. pay attention to L and R
position of terminals, on both the DN-X1100 and
outboard gear.
5. Connect the stereo outputs to the power
amplifier(s) and/or tape deck(s) and/or MD
recorder(s) and/or CD recorder(s). Plug the DN-
X1100 into AC power outlet.
Audio cables
For RCA PINJACK
R
L
R
L
RCA pin plug
For SEND/RETURN
Unbalanced Unbalanced
For MIC
Balanced Balanced
1/4” TRS XLR3-11C Type
For BALANCED MASTER OUT
Balanced Balanced
1/4” TS 1/4” TS
1=GND
2=Hot
3=Cold
Ring=Cold
Tip=Hot
2=Hot
1=GND
3=Cold
Sleeve=GND
Ring=Cold
Tip=Hot
1/4” TRS
XLR3-11C Type
Main unbalanced
power amplifier
Main balanced power
amplifier
Balanced Microphones
CD player
1/4” TRS balanced
Tape deck
CD player
NOTE
Keep volume at comfortable sound levels and avoid extended play at very high volume as it may cause
temporary or permanent hearing loss.
CD player
Booth balanced/
power amplifier
Effects processor
Turntable 2
Turntable 1
Mic
XLR or 1/4” TRS balanced
DN-X1100
Turntable 3
Sleeve=GND
Connections
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1100 in the language / languages: English as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info