498654
13
Zoom out
Zoom in
Previous page
1/16
Next page
7
ENGliShDEutSchFrANçAiSitAliANoESpAñolNEDErlANDSSVENSKA
Connect Preparation Playback
РУССКИЙPOLSKITÜRKÇE
Setup
7
ENGliShDEutSchFrANçAiSitAliANoESpAñolNEDErlANDSSVENSKA
3
Use ui to select a speaker, and use
o p to select distance.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R / Surround Back Lz /
Surround Back Rz
Select the speaker.
z When the “Speaker Config.” – “Surround
Back” (vpage 6) setting is set
to “None”, “Surround Back L” and
“Surround Back R” is not displayed.
•0.00m – 18.00m : Set the distance.
•The speakers that can be selected differ
depending on the “Speaker Config.”
(vpage5) settings.
•Default settings :
Front L / Front R / Center / Subwoofer : 3.6 m
Surround L / Surround R /
Surround Back L / Surround Back R : 3.0 m
•Set the difference in the distance between the
speakers to less than 6.0 m.
NOTE
Speakers set to “None” in “Speaker Config.”
(vpage5) are not displayed.
4
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Step
Front L/R
Center
Subwoofer
Surround L/R
[ ][ENTER] Enter Return
Speaker Setup
1
Use ui to select “Channel Level”,
and then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
[ ][ENTER] Enter Return
Speaker Setup
Test Tone Start
Default
[ ][ENTER] Enter Return
1
Channel Level
2
Press ENTER.
Output test tone.
Front L
Center
Front R
Surround R
Surround L
Subwoofer
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
[ ][ENTER] Enter Return
1
Channel Level
3
Use ui to select a speaker, and use
o p to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround Back Rz / Surround Back Lz /
Surround L / Subwoofer
Select the speaker.
z When the “Speaker Config.” – “Surround
Back” (vpage 6) setting is set
to “None”, “Surround Back L” and
“Surround Back R” is not displayed.
•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
•When o is pressed while the subwoofer volume
is set to “–12 dB”, the “Subwoofer” setting
switches to “OFF”.
•When “Channel Level” is adjusted, the adjusted
values are set for all the surround modes. To
adjust the channel level separately for the
different surround modes, use the operation
see vm page 28 “Adjusting the volume of
the speakers“.
NOTE
•Speakers set to “None” in the “Speaker Config.”
(vpage6) settings are not displayed.
•When a headphones jack is inserted in the
PHONES jack of this unit, the “Channel Level”
is not displayed.
Default
The “Channel Level” settings are
returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
4
Press ENTER to enter the setting.
Test Tone Start
Default
[ ][ENTER] Enter Return
1
Channel Level
5
Press RETURN B.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
[ ][ENTER] Enter Return
Speaker Setup
Distance (Continued)
Default settings are underlined.
Channel Level
Default settings are underlined.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1312 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1312

Denon AVR-1312 User Manual - English - 66 pages

Denon AVR-1312 User Manual - German - 66 pages

Denon AVR-1312 Quick start guide - Spanish - 16 pages

Denon AVR-1312 User Manual - Spanish - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info