498654
12
Zoom out
Zoom in
Previous page
1/16
Next page
6
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
РУССКИЙ POLSKI TÜRKÇE
6
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
3
Use ui to select “SW Mode”, and
use o p to select a detailed setting.
LPF for LFE
SW Mode
120Hz
LFE
[ ][ENTER] Enter Return
1
Bass Setting
SW Mode
Select low range signals to be
reproduced by subwoofer.
•LFE : The low range signal of the channel set to
“Small” speaker size is added to the LFE signal
output from the subwoofer.
•LFE+Main : The low range signal of all channels
is added to the LFE signal output from the
subwoofer.
•“SW Mode” can be set when “Speaker Config.”
– “Subwoofer” (vpage6) is set to “Yes”.
•Play music or a movie source and select the
mode offering the strongest bass.
•Select “LFE+Main” if you want the bass signals
to always be produced from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.”
are set to “Large”, and “SW Mode” is set to
“LPF for LFE”, no sound may be output from
the subwoofers, depending on the input signal or
selected surround mode.
4
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
LPF for LFE
SW Mode
[ ][ENTER] Enter Return
Speaker Setup
1
Use ui to select “Bass Setting”, and
then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
LPF for LFE
SW Mode
[ ][ENTER] Enter Return
Speaker Setup
LPF for LFE
SW Mode
120Hz
LFE
[ ][ENTER] Enter Return
1
Bass Setting
2
Use o p to select the frequency.
LPF for LFE
Set LFE signal playback range.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz /
200Hz / 250Hz
1
Use ui to select “Distance”, and
then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Step
Front L/R
Center
Subwoofer
Surround L/R
[ ][ENTER] Enter Return
Speaker Setup
Step
Front L
Front R
Center
Subwoofer
0.1m
3.60m
3.60m
3.60m
3.60m
[ ][ENTER] Enter Return
1
Distance
2
Use o p to change the step (minimum
variable distance).
0.1m : For changing in 0.1-meter steps.
0.01m : For changing in 0.01-meter steps.
Surround Back
Set the presence, size and
number of surround back
speakers.
•Large : Use a large speaker that can adequately
play back low frequencies.
•Small : Use a small speaker that has inadequate
playback capacity for low frequencies.
•None : Select when the surround back speakers
are not connected.
Even when the “Surround Back“ setting
is other than “None”, sound may not be
emitted from the surround back speaker,
depending on the playback source. In this
case, make “Surround Parameter” – “SB CH
OUT” (vm page 38 “Adjusting the sound
field effects“) setting other than “OFF”.
Subwoofer
Set the presence of a subwoofer.
•Yes : Use a subwoofer.
•No : Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer”
is automatically set to “Yes”.
5
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Front
Center
Surround
Surround Back
Subwoofer
[ ][ENTER] Enter Return
Speaker Setup
Speaker Config. (Continued) Bass Setting
Default settings are underlined.
Distance
Default settings are underlined.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-1312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-1312 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-1312

Denon AVR-1312 User Manual - English - 66 pages

Denon AVR-1312 User Manual - German - 66 pages

Denon AVR-1312 Quick start guide - Spanish - 16 pages

Denon AVR-1312 User Manual - Spanish - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info