687067
4
Zoom out
Zoom in
Previous page
1/28
Next page
9
SPOUTS" is displayed. As well as heating the boiler, this
also heats the internal circuits by circulating hot water.
Please note! Using for the rst time:
3. "GET READY TO EXPERIENCE YOUR NEW ESPRESSO MA-
CHINE. ENJOY THE VIDEO!": press "OK" to watch a short
video on the homepage;
4. "MACHINE READY. ENJOY YOUR COFFEE!": Press "OK" to
go to the homepage (main screen) (or press "Repeat" to
watch the video again).
The appliance is at temperature when the main "CHOOSE YOUR
FAVOURITE" screen appears.
5. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
1. To turn the appliance o, press the button (A8) (g.
10).
2.
"TURNING OFF UNDERWAY": if envisaged, the appliance
performs a rinse cycle, delivering hot water from the coee
spouts (A17), then goes o (stand-by).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
1. First turn the appliance o by pressing the button
(g. 10);
2. Release the main switch (A12) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
6. MENU SETTINGS
6.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A17) and hot water/steam spout (F), if inserted, to clean and
heat the appliances internal circuit.
Place a container with a minimum capacity of 100ml under the
coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the settings menu (B6);
2. Select "Rinsing";
3. "Position 0.5l container under spouts. Press OK to start".
Press OK to start delivery. After a few seconds, hot water is
delivered rst from the coee spouts, then the hot water/
steam spout (if inserted) to clean and heat the internal
circuit of the appliance (g. 11). "Rinsing underway. Hot
water from spouts" appears on the display (B1);
4. To stop rinsing, press "Cancel" or wait for rinsing to stop
automatically.
Please note!
If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2-3 rinses before use;
After cleaning, it is normal for the grounds container (A18)
to contain water.
6.2 Descaling
For instructions on descaling, see section “18. Descaling”.
6.3 Clean milk container
This function can be used to clean the milk container (D) before
putting it in the refrigerator. To clean, proceed as follows:
1. Attach the milk container to the connection nozzles (A11)
and push as far as it will go (g. 22). The machine emits a
beep (if the beep function is enabled);
2. Adjust the milk spout (D6) by turning it anticlockwise (g.
23);
3. Place a recipient under the milk spout (g. 26);
4. Press the settings menu;
5. Select "Clean milk container";
6. "Place recipient under milk spout. Press OK to start milk
container cleaning";
7. Press "OK" to start cleaning: "CLEANING MILK CONTAINER
UNDERWAY. PLACE A RECIPIENT UNDER MILK SPOUT" (g.
26): hot water is delivered from the milk spout and stops
automatically when cleaning is complete.
8. Before extracting the milk container, place the milk spout
in the not-in-use position by turning it clockwise.
Please note!
Never extract the milk container by pulling the milk spout.
To interrupt the cleaning cycle at any moment, press
"Stop";
In some cases, to clean you must wait for the appliance to
heat up;
The milk container can be kept in the refrigerator.
6.4 Adjust mill
The appliance has two coee mills corresponding to beans con-
tainers (I) (A4) and (II) (A6). The coee mills are set by default
to prepare coee correctly and should not require regulating
initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), they can be adjusted.
Proceed as follows:
1. Press the settings menu (B6);
2. Select "Adjust mill". A tutorial is displayed with suggestions
on the grinding level; if you want to skip this presentation,
press "Skip" or "Next" to continue with the tutorial;
3. "Select mill [I] or [II] and adjust coarseness within the
available range":
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Maestosa - EPAM960.75.GLM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Maestosa - EPAM960.75.GLM in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Maestosa - EPAM960.75.GLM

DeLonghi Maestosa - EPAM960.75.GLM User Manual - German - 38 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Dutch - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - French - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Italian - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Spanish - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info