687409

DeLonghi Dinamica Plus ECAM370.85 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
9
6. MENU SETTINGS
6.1 Access the settings menu
1. Press the " " button (C3) to enter the menu;
2. Scroll through the menu items by pressing
until the required items is displayed;
3. Press the menu item you want to select.
6.2 Exit the menu
When you have made the adjustments, press
until you are back on the homepage.
6.3 Rinse
Use this function to deliver hot water from the coee spouts
(A9) and hot water spout (D6), if inserted, to clean and heat the
appliance’s internal circuit.
1. Place a container with a minimum capacity of 100ml under
the coee and hot water spouts (g. 8).
2. A few seconds after the "RINSING" item has been selected,
hot water is delivered rst from the coee spouts and then
from the hot water spout (if inserted) which cleans and
heats the appliance’s internal circuit (g. 7).
3. To stop rinsing, press or wait for rinsing to
stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the grounds container (A11)
to contain water.
6.4 Descaling
For instructions on descaling, see section "13. A Descaling".
6.5 Water lter
For instructions on how to install the lter (D7), see section "15.
nWater softener lter".
6.6 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
1. Once in the settings menu, press "DRINK SETTINGS". The
values for the rst beverage appear on the display;
2. The values are displayed on vertical bars. The default value
is indicated by the symbol, while the current value is
highlighted by the solid part of the vertical bar;
3. To go back to the settings menu, press . To
scroll and display the beverages, press ;
4. To reset the default values for the beverage displayed,
press ;
5. "CONFIRM RESET?": to conrm, press (to
cancel, press );
6. "VALORI FABBRICA""IMPOSTATI": press .
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing
twice.
6.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press "AUTO-OFF";
2. Select the required time interval by pressing the selection
arrows (increase) or (decrease);
3. To conrm, press .
Auto-o is now programmed.
6.8 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press "ENERGY SAVING" to disable ( ) or enable (
) the function;
The corresponding symbol (B1) appears on the top bar of the
homepage to indicate that the function has been enabled.
Please note:
If energy saving is active, you may have to wait a few seconds
before delivery.
6.9 Coee temperature
To change the temperature of the water used to make the cof-
fee, proceed as follows:
1. Press "COFFEE TEMPERATURE"
. The selectable values
appear on the display (B1) (the current value is underlined);
2. Press the value you want to set (LOW, MEDIUM, HIGH).
Please note:
Varying the temperature has most eect for long beverages.
6.10 Water hardness
For instructions on setting water hardness, see section "14. H
Setting water hardness".
6.11 Set language
To modify the language of the display, proceed as follows:
1. Press "SET LANGUAGE";
2. Press the ag corresponding to the language you want
to set (press to display all the languages
available).
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Dinamica Plus ECAM370.85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Dinamica Plus ECAM370.85 in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Dinamica Plus ECAM370.85

DeLonghi Dinamica Plus ECAM370.85 User Manual - Dutch - 21 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - French - 20 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - Italian - 20 pages

DeLonghi Dinamica Plus ECAM370.85 User Manual - Spanish - 20 pages

DeLonghi Dinamica Plus ECAM370.85 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info