480467
35
Zoom out
Zoom in
Previous page
1/160
Next page
Setting Up Your Computer 35
Modem and Internet Connection Problems
NOTICE: Connect the modem to an analog telephone wall jack only. Connecting the modem to
a digital telephone network damages the modem.
NOTICE: Modem and network connectors look similar. Do not plug a telephone line into the
network connector.
NOTE: If you can connect to your Internet service provider (ISP), your modem is functioning
properly. If you are sure that your modem is working properly and you still experience problems,
contact your ISP.
C
HECK THE TELEPHONE WALL JACK Disconnect the telephone line from the modem and
connect it to a telephone. Listen for a dial tone. Ensure that you have touchtone telephone service.
Try connecting the modem to a different telephone wall jack.
Slow connection speeds can be caused by telephone noise as well as by telephone line or network
conditions. Contact your telephone company or network administrator for more information.
C
ONNECT THE MODEM DIRECTLY TO THE TELEPHONE WALL JACK If you have other
telephone devices sharing the line, such as an answering machine, fax machine, surge protector, or line
splitter, then bypass them and use the telephone line to connect the modem directly to the telephone
wall jack.
C
HECK THE CONNECTION Verify that the telephone line is connected to the modem.
C
HECK THE TELEPHONE LINE Try using a different telephone line. If you are using a line that
is 3 m (10 ft) or more in length, try a shorter one.
I
RREGULAR DIAL TONEIf you have voice mail service, you might hear an irregular dial tone
when you have messages. Contact your telephone company for instructions on restoring a dial tone.
T
URN OFF CALL WAITING (CATCH-PHONE)—See your telephone directory for instructions on
deactivating this feature. Then adjust the dial-up networking connection properties.
1 Click the Start button and click Control Panel.
2 Click Printers and Other Hardware, click Phone and Modem Options, click the Dialing Rules tab,
and then click Edit....
3 In the Edit Location window, ensure that To disable call waiting, dial: is checked, and then select
the proper code as listed in your telephone directory.
4 Click Apply and click OK.
5 Close the Phone and Modems Options window.
6 Close the Control Panel window.
V
ERIFY THAT THE MODEM IS COMMUNICATING WITH WINDOWS
1 Click the Start button and click Control Panel.
2 Click Printers and Other Hardware and click Phone and Modem Options.
3 Click the Modems tab.
4 Click the COM port for your modem.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dell Inspiron 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dell Inspiron 5100 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info