D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective
owners. Product specications, size and shape are subject to change without notice, and actual product appearance may dier from
that depicted on the packaging. Visit www.dlink.com for more details. Maximum throughput based on theoretical transmission PHY rate.
Actual date throughput will vary. Network conditions and environmental factors, including volume of trac and network overhead, may
lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may
adversely aect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer
switch, short wave radios, or other powerline devices that do not follow the HomePlug AV and IEEE1901 standard.
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Internet: http://support.dlink.com
Canada
Internet: http://support.dlink.ca
1Power LED
• Solid: The device is receiving electrical power.
• Blinking: The device is powering up or in power
saving mode.
• O: The device is not receiving electrical power.
2PowerLine LED
• Solid: The device is connected to a Powerline
network.
• O: The device has not found any other
compatible Powerline devices using the same
encryption key.
The color indicates the Powerline link rate:
• Green: The Powerline link rate is best.
• Amber: The Powerline link rate is better.
• Red: The Powerline link rate is good.
3Ethernet LED
• Solid: The Ethernet port is linked.
• O: There is no Ethernet connection.
4
Simple Connect
Button/Reset Button
Press and hold the button for two seconds to
secure your network or hold the button for 10
seconds to reset to the factory default settings.
5Gigabit Ethernet Port
Connect to a 10/100/1000 Ethernet device such
as a router, computer, gaming console, network
storage unit, or a media player.
1
2
3
1
Plug in one of the DHP-600AV adapters and connect to your
router with an Ethernet cable. The Power and Ethernet LEDs
should both light up.
2
Plug in the other DHP-600AV adapter in the room that you want
to extend your network. The Power LED will turn on.
3
Verify that the PowerLine LEDs on both adapters are lit. If they
are, the adapters are connected. If not, try another outlet.
DHP-600AV
DHP-600AV
DHP-600AV
4
5V
2.5A
USB
WPS
1
2
3
4
INTERNET
POWER
DHP-600AV
Router
Internet
DHP-600AV
5
4
You can now connect another device using an Ethernet cable
to the DHP-600AV adapter. Verify that the Ethernet LED is lit.
Your installation is completed.
Package Contents
Hardware OverviewRecommendations
Installation
Contact Technical Support
5
To secure your network, press the Simple Connect button (on
the bottom) for two seconds on one of the adapters. The Power
LED will start to blink. Then, within two minutes, press the
Simple Connect button on the other adapter for two seconds.
Once the Power LEDs stop blinking, verify that the PowerLine
LED is lit on both adapters (as in Step 3). This indicates that your
adapters are properly connected to each other.
DHP-600AV
DHP-600AV
DHP-600AVDHP-600AV
Simple Connect ButtonSimple Connect Button
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for D-Link DHP-601AV at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of D-Link DHP-601AV in the language / languages: English as an attachment in your email.
The manual is 0,46 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.