498261
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
ENG
The LED (POWER, fig. 2, 7) lits up, if the amplifier is in operation.
The LED (PROTECT, fig. 2, 7) lits up, when the amplifier is overheated, or a short circuit occurs resp.
a too low impedance load is connected to the speaker outputs. If this happens, the internal built-in
protection circuit shuts down the amplifier automatically. The amplifier should work again properly after
you have solved the problems.
PROTECTION CIRCUIT
The controller (PHASE, Fig. 1, 4) allows to adjust the phase between 0° and 180° to match the run
time of the output signal with the vehicle’s interior acoustic.
VARIABLE PHASE CONTROLLER
By using the controller (BASS BOOST, Fig.1, 5) you are able to increase the bass level. The range is
between 0 and 12dB.
Note: Use the bass boost wisely. A too high bass boost could permanently damage the speakers.
VARIABLE BASS BOOST
POWER SUPPLY AND TURN ON CONNECTION (FIG. 2)
(1) +12 V terminal for the positive-connection of the battery
(2) REM terminal for the turn on connection
(3) GND terminal for the ground
(4) Vehicle’s battery
(5) In-Line Fuse (not included in the scope of delivery)
(6) Turn on wire from the headunit or the electrical antenna
(7) Protection-LED and Power-LED
1-CHANNEL MONO OPERATION (FIG. 3) WITH 1 SUBWOOFER
If you want to run the amplifier with the 2 line output channels from the headunit to drive 1 subwoofer,
connect the following setup:
(1) RCA audio signal input from the headunit, line output left or SUB OUT
(2) RCA audio signal input from the headunit, line output right or SUB OUT
(3) Stereo high level input for loudspeaker outputs from the headunit
(4) Remote control to adjust the bass level e.g. from the driver’s seat
(5) Subwoofer (1-8 Ohms)
NOTE: (1 & 2) must not be operated simultaneously with (3).
FIGURES (P. 28-29)
CONNECTIONS AND CONTROLLERS (FIG. 1)
(1) RCA audio signal inputs from the headunit
(2) High level signal input for loudspeaker outputs from the headunit.
(3) Gain level controller
(4) Phase controller
(5) Bass boost controller
(6) Remote jack for the included bass remote control
(7) Subsonic controller
(8) Lowpass filter controller
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch GTO1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch GTO1200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info