228592

Conrad kj 970 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
Version 04/04
These operating instructions are published by Conrad Electronic GmbH, Klaus-
Conrad-Straße 1, D-92240 Hirschau/Germany.
The operating instructions reflect the current technical specifications at time of
print. We reserve the right to change the technical or physical specifications.
© Copyright 2004 by Conrad Electronic GmbH. Printed in Germany.
OPERATING INSTRUCTIONS
www.conrad.com
GB
Comfort headset KF-970
item no. 92 20 42
Prescribed use
The Comfort headset is designed for having telephone conversations
without a receiver. The headset is connected between the telephone and
the receiver.
Do not expose the device to moisture such as e.g. in bathrooms etc.
Any use other than the one described above damages the product.
Moreover, this involves dangers such as e.g. short-circuit, fire, electric
shock, etc.
Safety instructions
Nor do we assume liability for damage to property or personal injury, caused
by improper handling or the failure to observe the safety instructions! The
guarantee will expire in any such case.
• The unauthorized conversion and/or modification of the device is
inadmissible because of safety and approval reasons (CE).
• Consult an expert when in doubt about the mode of operation, safety or
connection of the device.
• Also observe the safety and operating instructions of other devices
which are connected to the headset.
• Do not leave packing material unattended. Plastic foils/bags, polystyrene
parts, etc. might become dangerous toys for children.
• Keep the device out of reach of children. It is not a toy.
• In industrial facilities, the safety regulations laid down by the professional
trade association for electrical equipment and facilities must be adhered
to.
• When in doubt about how to connect the device correctly or should any
questions arise that are not answered in these operating instructions,
contact our Technical Advisory Service or another expert.
Commissioning
Never place the device onto an unstable surface.
Furthermore, no devices with strong magnetic fields must be in the proximity
of the device. No devices with strong electric fields such as e.g. mobile
phones, radio devices, electric engines etc. must be in the proximity of the
headset.
Because of the variety of used lacquers and polishes for furniture, the
device base might leave residues on furniture due to a chemical reaction.
In case of any damages which are caused due to failure to
observe these operating instructions, the guarantee will
expire!
We do not assume any liability for resulting damages!
Before using the product, please read the complete
operating manual thoroughly in order to ensure proper
commissioning!
It might fall down and injure people.
Such devices might affect the functionality of the headset.
Therefore, do not place the device onto valuable furniture
surfaces without appropriate protection.
Connection
Inserting/replacing the batteries
Open the battery compartment (1) and
insert the batteries into the battery
compartment ensuring correct polarity.
The correct polarity is indicated on the
battery compartment cover or in the
opposite figure. Wrong polarity might
destroy the headset.
Close the battery compartment.
If the headset does not work properly,
remove the old batteries. Insert two new
(AA) mignon batteries and close the
battery compartment.
Thus, you comply with your legal obligations and make your contribution to
environmental protection!
Please observe correct polarity when inserting the batteries.
Keep batteries out of reach of children.
Do not let batteries lie around openly. There is the risk of
batteries being swallowed by children or pets. In such a case,
seek immediate medical care.
Leaking or damaged batteries might cause acid burns
when getting into contact with skin. Therefore, use
suitable protective gloves. Make sure that batteries are not
short-circuited or thrown into fire. They may not be
recharged or dismantled. They might explode!
Remove the batteries if the device is not in use for a longer
period of time in order to prevent electrolyte leakage.
Batteries/storage batteries containing harmful substances are
marked with the following symbols which point out that the
disposal via the household rubbish is prohibited. The
designations for the respective hazardous heavy metals are: Cd
= cadmium, Hg = mercury, Pb = lead. You can return used
batteries/storage batteries free of charge to any collecting
facility of your local authority, to our stores or to any other store
where batteries/storage batteries are sold!
Mains connection
For connecting a plug mains unit (not enclosed in the delivery), connect the
low-voltage connector of the plug mains unit to the jack (2) of the headset.
Headset clamp
Insert the headset clamp into the holding
device (12) according to the opposite
figure.
Telephone adaptation
As power supply, use a plug mains unit with 6V DC voltage and
a minimum loading capacity of 100 mA only.
Please observe the polarity :
(positive pole inside)
Wrong polarity inevitably destroys the device!
As power source for the plug mains unit, use a 230V/50 Hz (10/
16A) mains socket of the public mains only. Never try to
operate the device at another voltage.
Never try to unplug the device by pulling the cable of the plug
mains unit. Always unplug it from the mains socket pulling at
the housing.
During installation, make sure the connecting cables are
neither jammed nor damaged by sharp edges.
Remove the mains plug unit from the mains socket and remove
the batteries if the device is not in use for a longer period of
time.
Always unplug the plug mains unit from the mains socket
before cleaning the device.
Never replace damaged connecting cables on your own. In
such a case, separate the device from the mains voltage and
take it to a specialist workshop.
Having a conversation
In order to have a conversation via the headset, pick up the phone and dial
the desired telephone number the usual way.
If the called person picks up his/her phone, you can have a conversation via
the headset.
Adjust the volume of the receiver and of the microphone by means of the
controllers (5) and (9).
In order to speak free without the called person listening to it, press the
"mute" key (11). Press the key (11) again to continue the telephone
conversation.
Put the phone down to finish the conversation.
Changing between headset and telephone operation
You are having a conversation via the headset and would like to talk via the
telephone receiver. For this purpose, set the switch (10) to the OFF position.
Now, you can continue the conversation via the telephone receiver.
Technical data
Make sure that switch (10) is set to position ON (the green LED
of the headset lights).
You can adjust the microphone volume by means of the
controller (5) and the volume of the headset loudspeaker by
means of the controller (9).
Operating voltage: Plug mains unit:
Batteries:
6 V DC / 100 mA
2 x mignon batteries (AA)
Current consumption: Plug mains unit:
Batteries:
max. 30 mA
max. 10 mA
Microphone and
loudspeaker level:
10 steps each
• Remove the receiver
cable (helix cable) of the
telephone.
• Connect the enclosed
western cable to the free
jack of the telephone.
• Connect the second
western connector of this
cable to the jack (4) of the
headset.
• Connect the western
connector of the receiver
cable to the jack (3) of the
headset.
• Connect the headset to
the jack (5).
• The headset can be
operated by means of
batteries or storage
batteries. In case of using
a mains unit, connect the
low-voltage connector to
the jack (2) of the
headset.
Due to the different configurations and
adaptations of the different telephone
types, you have to adapt the headset to
your telephone.
• Push the lateral cover down (see
opposite figure).
• Pick up the receiver of your phone.
• Put the headset on your head.
• Call somebody dialing the desired
number by means of the keys of your
phone.
• If the speech quality is not clear and
distinct, adjust it by means of the
sliding switches (7) and (8).
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad kj 970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad kj 970 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info