635863

Cointra Thermex Blitz IBL Manual

3
Zoom out
Zoom in
Previous page
1/9
Next page
3
To power EWH if EWH is not filled with water.
• To remove the protective cover when the power is on. EN
• Use EWH without grounding or use water pipes as grounding.
• To connect EWH to water main with pressure exceeding 0.7 MPa.
• To connect EWH to the water supply without safety valve.
• To drain water from EWH with power switched on.
• To use spare parts not recommended by the manufacturer.
• To use water from the EWH for cooking.
• To use water containing impurities (sand, small stones), which might lead to EWH and safety
valve breakdown.
• To modify design and installation dimensions of EWH brackets.
• Ambient temperature, where EWH is operated, shall be within the range from 3° c to 40° C.
Water freezing in EWH at negative temperatures cause its malfunction, which is not a guarantee case.
Attention should be paid to children so that they do not play with EWH. EWH is not intended
for use by persons (including children) with limited physical, sensory or mental capabilities, or
by persons who do not know how to use the EWH, except for cases when this happens under
the supervision or instructions by persons responsible for safety of the EWH.
6. Installation and connection
All installation, plumbing and electrical works must be performed by qualified personnel.
6.1.
Arrangement and
installation
EWH installation shall be performed in accordance with marking on the housing and the following
table:
Model
Volume (l)
Arrangement
IBL-O 10, 15
Pipes down
IBL-U
10, 15
Pipes up
It is recommended to install EWH as close as possible to the place of hot water using to reduce heat loss in the
pipes.
When drilling (making) holes in the wall, you should consider cables, ducts and pipes in the wall.
When choosing EWH installation place take into account total weight of EWH filled with water. Wall
and floor with low carrying capacity shall be reinforced accordingly.
EWH is suspended with housing bracket on the anchor fixed into the wall. Hooks mounting on the
wall shall exclude spontaneous moving of EWH brackets.
To perform maintenance and servicing of EWH the distance from the protective cover to the nearest
surface in the direction of removable flange axis shall be at least 0.5 m.
In order to avoid damage of the user’s and/or third parties’ property in the event of a faulty hot
water system, it is required to install EWH in spaces with waterproofing and drainage to the
sewers, and in no case to place under items exposed to the water under EWH. When placed
in unprotected areas a protective plate (not supplied) with drainage into sewers shall be
installed under the EWH.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cointra Thermex Blitz IBL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cointra Thermex Blitz IBL in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info