Manual Climadiff Clima 19 (page 18 of 20) (English, French)

653705

Zoom out

Zoom in

1/20

INSTALLATION INSTRUCTIONS (optional)

Exhaust hose installation:

The exhaust hose and adaptor must be installed or removed

INSTALLATION INSTRUCTIONS

Water drainage:

Fig.16

Expansion plug

position

Adaptor

cap

Fig.17

Fig.18

accordance

with the usage mode.

COOL,

AUTO mode

Install

FAN,DEHUMIDIIFY mode

Remove

1. Install the window

Exhaust

adaptor B onto the exhaust

hose as shown in Fig.16. or Fig.17. Refer to the previous

pages for window kit installation.

2. Push the

Exhaust

hose into the

airoutlet opening

along the

the arrow

direction(See

Fig.18).

The exhaust hose can be installed into the wall

(Not

applicable

to the units without

adaptor

A, expansion

plugs and

wooden

screws of

Accessories

)

1. Prepare a hole in the wall. Install the wall Exhaust

adaptor

onto the

wall(outside)

by using 4

expansion

plugs and

wooden

screws, be sure to fix

thoroughly.

(See Fig.19)

to wall Exhaust

adaptor

Note:

Cover the hole using the adaptor cap when not in use.

The duct can be compressed or extended moderately

according to the installation requirement, but it is

desirable to keep the duct length to a minimum.

IMPORTANT:

DO NOT OVER BEND THE DUCT (SEE Fig.20)

CAUTION:

Fig.21

Continuous

drain hose

Remove the

drain plug

Fig.22

- During dehumidifying modes, remove the

drain

plug from the back of the unit, install the

drain

connector(5/8 universal female mender)

with

3 4 hose(locally purchased). For the

models

without drain connector, just attach the

drain

hose to the hole. Place the open end of

the

hose directly over the drain area in

your

basement floor. Please refer to Fig.21 &

22.

- When the water level of the bottom tray reaches

a predetermined level, the unit beeps 8 times,

the digital display area shows

. At this time

the air conditioning/dehumidification process will

immediately stop. However, the fan motor will

continue to operate(this is normal).

Carefully move the unit to a drain location,

remove the bottom drain plug and let the

water drain away (Fig.23). Re-install the bottom

drain plug and Restart the machine until the

symbol disappears. If the error repeats, call for

service.

NOTE: Be sure to reinstall the bottom drain plug

before using the unit.

max

120CM

min

30CM

Make sure that there is no

obstacle

around the air outlet of

the

exhaust

hose (in the range of

500mm)

in order to the

exhaust

system works properly.

Bottom drain plug

Fig.19

Fig.20

Fig.23

12 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Climadiff Clima 19 in the language / languages: English, French as an attachment in your email.

The manual is 2,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Climadiff Clima 19 Manual

Product: