562304

Cleanmaxx Z 04989 - JJ-SC-009D Manual

28
Zoom out
Zoom in
Previous page
1/60
Next page
28
11. Wait for a few minutes until the device has cooled down before you remove the fl oor cleaning
cloth or the carpet glider. Please note that when you park the device a wet patch can
form beneath the cleaning foot.
Use as Handheld Steam Device
CAUTION!
❐ Never operate the device without water in the water reservoir. The pump may be damaged if
the device is operated without water.
❐ Danger of injury! Only ever touch the device by the handles which are provided for this pur-
pose during operation.
1. Detach the handle rod and the cleaning foot from the main unit and attach the nozzle adapter
to it with the nozzle you want (see the "Assembling the Device" and "Device Functions"
(Functions of the Nozzles) chapters).
2. Fill the water reservoir (see the "Filling the Water Reservoir" chapter).
3. Insert the mains plug into a properly installed mains socket that is easily accessible.
4. Switch on the device by pressing the On/Off switch. The control lamp on the On/Off switch
lights up red as soon as the device starts the heating-up process. Wait until the device has
reached operating temperature and the control lamp lights up blue. You can now start cleaning
the fl oor.
5. Start cleaning. Press the steam release button on the handle and steam will begin to emerge
from the nozzle.
6. Allow the nozzle to glide slowly over the surface to be cleaned.
7. If during use no steam or only a small amount of steam is generated, check whether there is
suffi cient water in the water reservoir and top it up again. Before you top up the reservoir,
press the On/Off button, pull the mains plug out of the plug socket and then top up the water
reservoir in the manner described in the "Filling the Water Reservoir" chapter. Then carry on
cleaning the fl oor.
8. Once you have fi nished cleaning, let go of the steam release button, press the On/Off switch
and pull the mains plug out of the plug socket. Always pull the plug and never the cable!
9. Wait for a few minutes until the device has cooled down before you remove the nozzles or
the adapter.
After Use
1. Switch the device off and pull out the mains plug.
2. After each use, remove the water reservoir from the main unit and empty it into a sink.
3. Allow the device and accessories to cool down completely.
4. Clean the device and the fl oor cleaning cloth after you have used them in the manner described
in the "Cleaning, Storage and Care" chapter.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 04989 - JJ-SC-009D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 04989 - JJ-SC-009D in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info