Manual Cleanmaxx Z 04989 - JJ-SC-009D (page 27 of 60) (English, German, Dutch, French)

562304

Zoom out

Zoom in

1/60

❐ Danger of scalding! After you switch off the device, hot steam may continue to emerge for a

few seconds! Be careful!

❐ Always switch off the device and pull the mains plug from the plug socket before you remove

the ﬂ oor cleaning cloth or change the nozzle. Always pull the plug and never the cable!

❐ Danger of scalding! The ﬂ oor cleaning cloth / carpet glider / nozzle may be very hot during and

shortly after use. You should therefore wait for a few minutes until the cloth / glider / nozzle has

cooled down completely before you remove it.

❐ Beware of material damage! Very cold glass surfaces (windows in winter) must not be cleaned

with the device.

❐ Before using the device, always check the ﬂ oor cleaning cloth and the carpet glider for signs of

wear. Do not use them if they have visible signs of wear or are damaged. Your ﬂ ooring could

be damaged.

❐ Use the device only if it is in good working order and has been fully assembled and the ﬂ oor

cleaning cloth has been attached for cleaning ﬂ oors.

❐ Never direct the steam on one spot for longer than around 10 seconds without interruption.

This may damage the surface.

Cleaning the Floor

We recommend that, before using the device, you sweep the ﬂ oor with a broom or

vacuum it using a vacuum cleaner.

1. Attach the handle rod with the handle and the cleaning foot to the main unit. Attach to the

cleaning foot the ﬂ oor cleaning cloth and, if you want to clean a carpet, the carpet glider (see

the "Assembling the Device" chapter).

2. Fill the water reservoir (see the "Filling the Water Reservoir" chapter).

3. To unwind the mains cable, turn the upper hook for winding up the cable downwards. Hook the

mains cable into the cable holder so that you can handle the steam mop more easily and do not

trip over the cable while cleaning the ﬂ oor.

4. Place the device in an upright position. The joint of the cleaning foot locks in place in a vertical

position.

5. Insert the mains plug into a properly installed mains socket that is easily accessible.

6. Switch on the device by pressing the On/Off switch. The control lamp on the On/Off switch

lights up red as soon as the device starts the heating-up process. Wait until the device has

reached operating temperature and the control lamp lights up blue. You can now start cleaning

the ﬂ oor.

7. Hold the device by the handle and lower it gently towards the ﬂ oor to release the locked

standing position.

8. Slide the cleaning foot slowly back and forth over the ﬂ oor. The ﬂ oor is cleaned as you do this.

9. If during use no steam or only a small amount of steam is generated, check whether there is

sufﬁ cient water in the water reservoir and top it up again. Before you top up the reservoir,

press the On/Off button, pull the mains plug out of the plug socket and then top up the water

reservoir in the manner described in the "Filling the Water Reservoir" chapter. Then carry on

cleaning the ﬂ oor.

10. Once you have ﬁ nished cleaning the ﬂ oor, press the On/Off switch and pull the mains plug out

of the plug socket. Always pull the plug and never the cable!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 04989 - JJ-SC-009D in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 04989 - JJ-SC-009D Manual

Product: