497709
12
Zoom out
Zoom in
Previous page
1/12
Next page
Troubleshooting
The Memorized Positions
are not correct.
First, try re-sync to correct the position.
If the symptom recurs repeatedly, replace
the reed sensor to see whether it is OK.
The LED displays |------ or
------| and can’t move any
farther.
The symbols mean electrical limits, which have been
set. To cancel this setting, use the “Limit Off” function
on the receiver or press the limit key for more than 10
seconds. The LED will show “|- - - - - -|” when it is
clear.
The LED lights but the
positioner doesn’t work (no
response).
Unplug the AC power. Wait for more than 10
seconds then reconnect it.
Unstable AC power can cause this problem. To
protect the stored data, the positioner will lock
itself in this situation. A voltage regulator or UPS
might be needed.
The manual
3
3344
4
buttons
drive for only 1 count.
These buttons are for fine-
tuning only, and the receiver
doesn’t support this function.
Specification
Input Voltage : 220-240VAC 60Hz
13 / 18 VDC (F Type via Coaxial Cable)
Output Voltage : 13 / 18 VDC (F Type / According to the Input)
36VDC (via Motor Cable)
Output Power : 60 W (Rated / Motor Cable)
Maximum Current : 3A
Power Consumption : 5W (Standby) 90W (Maximum)
Position Memories : 99
Protocol : DiSEqC 1.2
Operating
Temperature
:
5°C to 40°C (41°F to 104°F)
Storage Temperature :
-20°C to 60°C (-4°F to 140°F)
Dimensions (WxHxD) :
230x65x165 mm
3
(Net)/260x70x210 mm
3
(Gross)
Weight : 1.6 Kg (Net) / 1.8 Kg (Gross)
Symptoms
Check points
Imported and distributed by satmedia GmbH Germany www.satmedia.com
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarke-tech V4000 VBOX DiSEqC Positioner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarke-tech V4000 VBOX DiSEqC Positioner in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info