497709

Clarke-tech V4000 VBOX DiSEqC Positioner Manual

11
Zoom out
Zoom in
Previous page
1/12
Next page
To store the satellite positions:
1. After the DiSEqC1.2 receiver moves the actuator and stores the satellite
position, the display will automatically show the stored position number.
To recall a satellite position:
1. When you change the program from the receiver, the positioner
automatically moves the actuator to the stored position. But if the
position has not been stored, the positioner will not respond. Refer to
your receiver manual.
2. If the channels and satellites are properly set up in the receiver, it will
move the actuator to the proper position when you change the channel.
When the proper position is reached, the display will show the satellite
number as “01” ~ ”99”.
3. You can still operate the VBOX positioner from its IR remote if
necessary.
To re-synchronize satellite positions (re-calculate):
1. Not every DiSEqC1.2 receiver supports this re-sync function. If the
receiver has this function, the VBOX will carry out this command, but the
display won’t show any message.
2. If necessary, you may still use the VBOX IR remote to re-synchronize.
To operate from the front panel push buttons
1. Move the actuator East/West with the 3
33
3 and 4
44
4
buttons to the desired position. Press and hold the
power button for 5 seconds, and the display will
show ”C--_ _”.
2. Press the 3
33
3MANUAL4
44
4 buttons to scroll through
the position numbers on the display (1-99) and to
choose the satellite positions you want to store.
3. Within 2 seconds, press the “POWER” button for confirmation. The LED
will show the number you choose. (for example, “P03”)
Imported and distributed by satmedia GmbH Germany www.satmedia.com
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clarke-tech V4000 VBOX DiSEqC Positioner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clarke-tech V4000 VBOX DiSEqC Positioner in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info