300954
182
Zoom out
Zoom in
Previous page
1/325
Next page
Configuring Regional Parameters and Supplementary Services
Configuring Supplementary Services (Star Codes)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 181
7
Call Forward All Act (*72)—Call forwards all inbound calls. Applies to
primary extension only.
Call Forward All Deact (*73)—Cancels call forward all. Applies to primary
extension only.0
Call Forward Busy Act (*90)—Call forwards on busy. Applies to primary
extension only.
Call Forward Busy Deact (*91)—Cancels call forward on busy. Applies to
primary extension only.
Call Forward No Answer Act (*92)—Call forwards if no answer. Applies to
primary extension only.
Call Forward No Answer Deact (*93)—Cancels call forward no answer.
Applies to primary extension only.
CW Act (*56)—Enables call waiting. For example, if call waiting is turned off
globally, this star code will turn on call waiting until the CW Deact code is
entered.
CW Deact (*57)—Deactivates call waiting. For example, if call waiting is
turned on globally, this star code deactivates call waiting until the CW Act
code is entered.
CW Per Call Act (*71)—Enables call waiting for a single call. For example, if
call waiting is turned off globally, this star code will turn on call waiting for
that call.
CW Per Call Deact (*70)—Deactivates call waiting for a single call. For
example, if call waiting is turned on globally, this star code deactivates call
waiting for that call.
Block CID Act (*67)—Blocks caller ID on all outbound calls. Applies to all
extensions.
Block CID Deact (*68)—Deactivates caller ID blocking on outbound calls.
Applies to all extensions.
Block CID Per Call (*81)—Blocks caller ID on the next outbound call (on the
current call appearance only).
Block CID Per Call Deact (*82)—Deactivates caller ID blocking on the next
outbound call (on the current call appearance only).
Block ANC Act—Blocks anonymous calls. Applies to all extensions.
Downloaded from www.Manualslib.com manuals search engine
182

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco wip 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco wip 310 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info