300954
163
Zoom out
Zoom in
Previous page
1/325
Next page
Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 162
6
Allow and Configure Profile Updates
The profile updates can be allowed at specified intervals. Updated profiles are
sent from a server to the phone by using a TFTP or HTTP.
To configure a profile update:
STEP 1 Click Admin Login > advanced > Voice > Provisioning.
STEP 2 Under Configuration Profile in the Provision Enable field, choose yes.
STEP 3 Enter the parameters defined in the table:
Parameter Description
Provision Enable Allows or denies resync actions. Defaults to yes.
Resync On Reset The device performs a resync operation after
power-up and after each upgrade attempt when
set to yes.
Resync Random Delay A random delay following the boot-up sequence
before performing the reset, specified in seconds.
In a pool of IP Telephony devices that are
scheduled to simultaneously powered up, this
introduces a spread in the times at which each unit
sends a resync request to the provisioning server.
This feature can be useful in a large residential
deployment, in the case of a regional power
failures.
Resync At (HHmm) Time in 24-hour format (hhmm) to resync the
device.
Resync At Random Delay To avoid flooding the server with simultaneously
resync requests from multiple phones set to resync
at the same time, the phone triggers the resync up
to ten minutes after the specified time. If this
parameter is provisioned, the Resync Periodic
parameter is ignored.
Resync Periodic Time in seconds between periodic resynchs. If this
value is empty or zero, the device does not resync
periodically.
Downloaded from www.Manualslib.com manuals search engine
163

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco wip 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco wip 310 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info