605004
4
Zoom out
Zoom in
Previous page
1/10
Next page
4
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
78-13937-04
2: Connect the Router to a Hub (Optional)
See the “3: Connect a Digital Subscriber Line” section on page 5 to complete the next step.
2: Connect the Router to a Hub (Optional)
If you have PCs connected to a hub, follow the steps shown in Figure 2 on page 4 to connect the router
to a hub. Figure 2 shows portions of two router back panels. Refer to the back panel that is similar to the
back panel of the router that you are installing.
Figure 2 Connecting the Router to a Hub
Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO HUB
position (in). If the button is out, press it to set it to the in position. You will know that the position is
correct if the LED for this port on the front of the router lights after the router and the PCs have been
turned on.
1 Set TO HUB/TO PC button for Cisco 827, 827-4V, or
SOHO 77 router.
4 Cisco 1528 Micro Hub 10/100
2 Set TO HUB/TO PC button for Cisco 827H, 828,
SOHO 77H or SOHO 78 router.
5 Connect other end of cable to hub.
3 Connect yellow cable to Ethernet port on router. 6 If applicable, check settings of hub equivalent of router
TO HUB/TO PC button.
ETHERN
ET 10BASE T
TO
HUB
TO
PC
4
3
2
1
Model Cisco 828
G.SHDSL
CONSOLE
E
T
H
E
R
N
ET
TO
H
U
B
T
O
P
C
+
5,+12
,-12,-24,-71 V
D
C
1
C
O
N
S
O
L
E
Model Cisco 827-4V
A
D
S
L
P
H
O
N
E
2
1
4
3
74082
ETH
ER
NET
SPEED
1
5
2
6
3
7
4
8
LED
100BaseTX
SOLID
10BaseT BLINK
1X
2X
3X
4X
5X 6X
7X
M
DI M
DI-X
8X
4. If applicable, check setting
of hub equivalent of router
TO HUB/TO PC button.
3. Connect other
end of cable
to hub.
Cisco 1528 Micro Hub 10/100
2. Connect yellow cable to
ETHERNET port on router.
1. Set TO HUB/TO PC
button.
1. Set TO HUB/TO PC
button.
2. Connect yellow cable to
ETHERNET port on router.
Cisco 827, Cisco 827-4V,
or SOHO 77 router
Cisco 827H, Cisco 828,
SOHO 77H, or
SOHO 78 router
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco SOHO Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco SOHO Series in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info