301131
3
Zoom out
Zoom in
Previous page
1/4
Next page
Initiating an AdHoc
Conference Call
1
2 Dial another number.
3
When the call connects, press
Confrn
again to add this party to the conference.
4
Repeat those steps to have up to
sixteen total
parties on your conference call.
Initiating a
Create a virtual meeting space that others can dial into to join you in conference.
Meet-Me
1
Conference
2
3
4
5
Call Forward
1
Press the CFwdALL soft key; you'll hear two quick beeps.
2
3
To cancel the forwarding, press CFwdALL button.
Tip: Verify Call forwarding is working by insuring the on your primary line in the status
window that the call forwarding icon is displayed --
Paging
No Paging -- no overhead paging or intercom.
Do Not Disturb
You can use Do Not Disturb (DND) to block incoming calls from ringing on your phone.
1 Press DND softkey
2
Note: When DND and Call Forward All are both enabled, then calls are forwarded and the
caller does not hear a busy tone.
Informational Features:
Emergency 911
You can dial either 911 or 9911 -- either will work.
Last Number Redial
To View
Missed Call, Placed
or
1
Received Calls
2 Use the Up/Down Arrow key to select the number.
3
Lift Handset, press Line Button, or press the NewCall soft key.
Press Redial Button on lower right of phone. The last number that you called will be dialed.
Tip: Press the
Exit
ExitExit
Exit
soft key twice if you want to exit the directory without making a call.
Note: Access the MeetMe conference by dialing the number given by the initiator. There is only one --
1050 . This is an internal number. It can only be setup and joined by dialing the MeetMe number inside
your network/offices.
Dial the number you want to forward your calls to. Don't forget to dial 9 if you want an
outside number. If you want to forward to voice mail, just press the Messages button.
Press the more soft key.
Press the Dial soft key to dial the selected number from list; or press the EditDial soft key
to edit the number first, and then press Dial.
Press the Directories button, and use the Up/Down Arrows Navigation key to select
Missed Calls, Placed Calls, Received Calls and press the Select soft key.
Tip: Total number of parties that can be connected on a MeetMe conference call is twenty five (25) .
Dial the meet-me meeting space number 1050 for this conference.
Press the MeetMe soft key.
Communicate the meet-me number you dialed to those you want to have join you in
conference.
Note: Once call is connected with another caller - you have a conference call in session. Now anyone can
add others to the conference call, and even when the conference Initiator hangs up, the other participants
can continue the conference. Also others can be added to the conference as long as you do not max out
the number of participants allowed.
While on a call, press the more soft key, then press the Confrn soft key. This will put the
first call on hold.
©2007 INX, all rights reserved
3
Quick Guide 1/2008
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco ip phone 7931g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco ip phone 7931g in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cisco ip phone 7931g

Cisco ip phone 7931g User Manual - English - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info