727980
134
Zoom out
Zoom in
Previous page
1/316
Next page
1-114
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Cisco 890 Series Integrated Service Routers
This section contains the following topics:
Cisco 891, Cisco 892, and Cisco 892F, page 1-114
Cisco C897VAB-K9, page 1-124
Cisco 891, Cisco 892, and Cisco 892F
The Cisco 891, Cisco 892, and Cisco 892F ISRs have the following features:
Integrated 8-port 10/100 Ethernet switch for connecting to the LAN
10/100 FE and 10/100/1000 Gigabit Ethernet (GE) port for connecting to the WAN
Separate console and auxiliary ports
(Optional) embedded Wi-Fi certified dual-radio 802.11a/b/g/n-compliant wireless AP
Optional 4-port PoE
Note The Cisco 890 Series ISRs can include an optional PoE module that provides power to
802.3af-compliant devices connected to Ethernet ports 0 through 3. If this feature was not
configured with the factory order, you must order and install it to enable the PoE function.
Note On a Cisco 891 series router, due to TCAM limitation, you can apply an ACL configuration on
maximum 9 ports. If you apply the ACL configuration beyond 9 ports, the configuration will not
be applied, and the router will display an error message.
Note Layer 2 FastEthernet ports of Cisco 800 series routers do not support Downloadable
ACL(dACL). Layer 2 GigabitEthernet ports support downloadable ACL(dACL).
Security feature card (SFC) socket
DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB
system memory in Cisco 891 and Cisco 892 ISRs, and a total of 1 GB system memory in
Cisco 892F series ISRs
Three reverse-polarity Threaded Neill-Concelman (RP-TNC) connectors on the back panel for
non-captive dual-band WLAN antenna (wireless models only)
Support for the AIM2-CUE-K9 and AIM2-APPRE-104-K9
GE small-form-factor pluggable (SFP) port (Cisco 892F series ISRs only)
The following feature is located on the front panel of
Two USB 2.0 ports
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco C899 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco C899 series in the language / languages: English as an attachment in your email.

The manual is 15,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info