588917
15
Zoom out
Zoom in
Previous page
1/16
Next page
Initialization runs only very slowly and is then
interrupted with 'Error'
•Transmitter battery empty or transmitter defective
•Transmitter is already initialised for other bike. If, in spite
of this, the transmitter should be initialised for this bike, a
total reset must be made (press AC button for 3 sec.), so
that the already existing initialisation is deleted.
Caution: With this, all settings and total values are also
deleted!
Automatic transmitter search does not start when
bike is in motion/moved.
CM 628 is not seated (or is not seated correctly) on the
handlebar bracket
•A transmitter has already been received (SPD 0 in the
display), which can happen e.g., when a change is made
from one bike to another. As long as the CM 628 is still
located in the area of the first transmitter, the indication
0 remains in the display. Only when the CM 628 is
outside of the range of the first transmitter does the
indication ' - ' appear. With the next movement, the
transmitter search then starts automatically.
Individual values (e.g. distance or average speed)
still change at the end of the tour, although the
wheel is at a standstill and displays the speed 0.
The CM 628 has a built-in correction function, so that all
values are checked again at the end of the tour (if no
further signal comes in – SPD 0) and corrected, where
appropriate. It can happen through this correction
function that, at the end of a tour, individual values
change once again – both Up and Down.
11. GUARANTEE
We offer a guarantee for 24 months from the date of
purchase on the CM 628. The guarantee is limited to
material and processing faults. The batteries are excluded
from the guarantee.
The guarantee is valid only if the computer, with
accessories, has been handled and maintained carefully
and according to operating instructions.
To return the CM 628 under conditions/terms of the
guarantee, please refer to your dealer, your local distributor
or send the computer with the proof of purchase(date) and
all accessories, and with sufficient postage, to:
CICLO SPORT SERVICE
K. W. Hochschorner GmbH
Konrad-Zuse-Bogen 8
D-82152 Krailling
6362
Phone: 0049 180 /5 00 47 43 (EUR 0,12 min.)
Fax: 0049 89 / 714 07 83
E-Mail: ciclo-service@ciclosport.de
Please read through the operating manual again carefully
before sending in the device and check the battery.
In case of valid guarantee claims, the repaired device or a
replacement device will be returned free of charge.
Repair
If your CM 628 is sent in for repair (or battery change) or if
a guarantee claim is not valid, repairs up to EUR 19.- will be
carried out automatically.
In case of higher repair costs you will be notified.
The repaired device will be sent back COD.
12. TECHNICAL DATA
CM 628
Operating temperature:
0°C to 50°C
Battery:
Lithium CR2032
Average battery life:
1 year (based on average use of 1 hour per day)
Transmitter belt
Reach:
Up to 10 m
Operating temperature:
0°C to 50°C
Battery:
Lithium CR2032
Average ba
ttery life:
1 year (based on average use of 1 hour per day)
Transmission frequency:
868 MHz
Speed and Cadence transmitter
Reach:
Up to 2 m
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 30
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628 Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628 Master in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628 Master

Ciclo CM 628 Master User Manual - German - 17 pages

Ciclo CM 628 Master User Manual - Dutch - 17 pages

Ciclo CM 628 Master User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info