588917
14
Zoom out
Zoom in
Previous page
1/16
Next page
the correct aim to follow in their training. But how do you
train to achieve those aims in the most efficient possible
manner? How do you find the right intensity of effort during
the training?
CICLO
IInnZone® is the optimum training
ZONE for effort, resistance and weight loss.
What does
CICLO
IInnZone® do?
It calculates the optimum training zone for effort, resis-
tance and weight loss.
The values vary from person to person and they offer a
valid training support - always staying between 70% and
85% of the maximum heart rate.
(+/- 5% of tolerance, taking into consideration the actual
heart rate when at rest and the level of training).
The question of burning fat is seen in the “correct” light
with
CICLO
IInnZone® – on the basis of the personal
data collected.
8. BATTERY CHANGE
If the values and adjustments of the CM 628 are to be
maintained during the battery change, the unit must be
switched into the power-saving mode before carrying out a
battery change (see Chap. 6). In addition, the new battery
must be inserted within 20 sec. after removal of the old
battery, otherwise the data will be deleted (in spite of
power-saving mode).
CICLOMASTER CM 628:
Unscrew anti-clockwise the screwed cap on the reverse
side of the computer with the aid of a coin. Remove the old
battery and insert new 3-volt lithium battery Type CR 2032
with the positive terminal Up. Close screw cap again.
Do not overtwist battery cover!
Speed and cadence transmitter:
The battery in the transmitters has a life of approx. 5 years
with normal use. For battery change, please send in the
transmitter (for address, see Chap. 10).
Transmitter belt battery:
Unscrew the battery cover in an anti-clockwise direction
and remove the old battery. Fit a new CR2032 lithium
battery, with the plus sign (+) facing upwards, and replace
the cover.
Please do not dispose of used batteries in domestic
waste, but dispose of according to regulations.
6160
9. CARE AND MAINTENANCE
Do not expose the device to direct sunlight, or to low or
high temperatures (below 0°C or above 50°C).
Keep the heart rate transmission belt clean:
Do not wash the transmitter belt in a washing machine, due
to the electrodes which are attached. To clean the trans-
mitter belt, wipe it carefully with a detergent for synthetic
fabrics. Do not dry in direct sunlight. The elastic chest belt is
washable, but it must be carefully dried before use.
10. TROUBLE SHOOTING
Faulty display or no indication in the display
No reaction from the pushbuttons
Press AC button on the underside of the device once or
repeatedly
Caution: Pressing the AC button for 3 sec. deletes all
values and adjustments
Check and/or renew battery
Instantaneous speed is not displayed
Speed too high or too low
Check transmitter and magnet for correct installation
Check whether magnet is correctly mounted on the
spoke (directly opposite the marker of the transmitter
with max. 3 mm separation distance)
•Transmitter battery empty or transmitter defective
Check distance between handlebar bracket and
transmitter (max. 2 m)
Check adjusted wheel circumference
Check unit of measure
Cadence is not displayed
Check whether switched on in the adjusting mode
Check transmitter and magnet for correct installation
•Transmitter battery empty or transmitter defective
No heart rate displayed or values displayed are
incorrect or unstable
proof whether heart rate is switched on in the setting
mode
Check transmitter belt (battery)
Skin too dry or cold
Distance between CM 628 and transmitter belt is too
great (max. 10 m)
Manual changeover to 2nd bike does not function
Check whether the speed is at zero (only then is a
changeover possible)
8
02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 28
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ciclo CM 628 Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ciclo CM 628 Master in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ciclo CM 628 Master

Ciclo CM 628 Master User Manual - German - 17 pages

Ciclo CM 628 Master User Manual - Dutch - 17 pages

Ciclo CM 628 Master User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info