793019
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
GB

Remove all the separate parts from the packaging, lay them on the
oor and check roughly that all are there on the base of the assembly
steps. Please note that a number of parts are connected directly to the
main frame preassembled. In addion, there are several other indivi-
dual parts that have been aached to separate units. This will makes
assembly easier and quicker for you. Assembly me: 30 min.
When removing the components from the carton, make sure that the
handlebar (50) turn only 90° to the right and posion into the handle
holder.
Part „Aserves as a transport sa-
fety device and it is no need aer
build up.
 Aach the front stabilizer (2) assembled with end caps with trans-
portaon rollers (3) to main frame (1), using inner hex screw M8x75 (4)
and washers (5).
 Screw in the adjustable foot (20) into appropriate posion at main
frame (1) and secure the posion by nut (19) to level the item into a
stabile stand.




 Place the connecon U-plate (11) onto the seat rail (6), so that the
holes paern and screw the connecon U-plate (11) at seat rail (6) by
using screws M8x20 (12) and washers (5).
 Lead the seat rail (6) against the main frame (1) and connect the
sensor 1 (46) with sensor connecon cable (37).
 Place the connecon U-plate (11) onto the holder of main frame
(1), sothat the side holes paern and ghten the connecon U-plate
(11) at main frame (1) by using screw M10x125 (8), washer (9) and nut
(10). Don’t ghten the screw (8) too much, sothat the fold up system
works easy.
 Secure the seat rail (6) before training by screw in the hand grip-
screw (32) with washer (13) and lock up with quick release (14).
 Screw out the limit stopper (15) from seat rail (6) and push the seat
slide (27) with preassembled seat (25) onto the seat rail (6) in the right
way as showed in gure Step 3.
 Fix the limit stoppers (15) at appropriate posion of seat rail (6) by
using axle for limited stopper (16), washer (17) and screw (18).


14

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit RMT 8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit RMT 8200 in the language / languages: English, German as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info