666002

Chacon 35956 Manual

1
Zoom out
Zoom in
Previous page
1/8
Next page
USER GUIDE
For 34956
EN
Introduction
Wireless outdoor strobe siren is to deter the intruders through
hooting once it receives wireless signal from connected control
panel or sensors. More wireless strobe sirens could be connected
to the same control panel to strengthen the deterring effect. When
the siren is connected to control panel as an accessory, it will hoot
siren is connected to accessories like remote control, door/window
contact, and PIR motion detector, etc. as a standalone alarm
triggered.
Product Overview
Front View
Alarm LED
Indicators
Status LED Indicator
Status LED Indication
Status LED
Arm/Home Mode Flash once every 5 seconds
Disarm No light indication
No disarm operation
after alarm
Flash once every 2 seconds for 2 hours
Rear View
Mounting Holes
Back Cover
Tamper Switch
Bracket
PCB Layout
Siren Interface
Learn Button
Adapter Jack
DC 12V
Terminals
Wired Sensor Terminals (Normal Zone)
Wired Sensor Terminals (24-H Zone)
Battery Slot
Alarming Volume Setup
Alarming Duration Setup
Jumper Setup
Please setup alarming volume and alarming duration time on the
PCB board accordingly.
Alarming Volume Setup
HIGH MUTE LOW
HIGH
HIGH
HIGH
MUTE
MUTE
MUTE
L
OW
L
OW
L
OW
Default Setting
Note: When the siren is connected to control panel, it will hoot at the pre-
set volume even if the control panel is set to mute alarm. This is to alert the
neighbors and avoid the intrusion. When the control panel is set to mute
disarm/arm, the siren will be disarmed/ armed mutely. When the siren is set
to mute mode, there are still tones for arming and disarming.
Alarming Duration Setup
5 MIN
5MIN
5 MIN
2 MIN
2 MIN
2 MIN
30S
30S
30S
5 MIN 2 MIN 30S
Default Setting
Work as Wireless Siren
When it works as a wireless siren, it should be connected with
wireless control panel in advance. When the control panel is
intruders.
Connect to Control Panel
Press the Learn Button for
0.5 second, siren beeps once
and enter connection status.
Press [SOS] or [Arm ] button
on the panel (or press Arm on
App if the panel does not have
a button), the wireless siren and
control panel are connected
successfully after one beep is
heard from siren.
Note: Once the siren is in connection status, please press Learn Button again
to exit. One beep will be heard from siren.
When connecting to control panel, please don't trigger any other sensors to
avoid interference.
Disconnection
Hold the learn button till 2 beeps are heard to disconnect the siren
and control panel.
www.chacon.be
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chacon 35956 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chacon 35956 in the language / languages: English, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info