666004

Chacon 34952 Manual

1
Zoom out
Zoom in
Previous page
1/5
Next page
USER GUIDE
For 34952
EN
FR
www.chacon.be
Introduction
The wireless vibration detector adopts the theory of vibration,
touch and motion mode. Once it detects any vibration, it will
automatically send wireless signal to the control panel for alarm. It
is widely used for objects with a solid or thick structure, like safe and
so on. Its vibrating sensitivity can be adjusted in three levels thus
it can prevent false alarm effectively. Two pieces of AAA 1.5V LR03
batteries are included in the detector, which enables 12 months
standby.
Product Overview
LED indicator
LED Indication
Flash once: Vibration detected, sending wireless signal to the control
panel.
Flash once every 2 seconds: Low battery. Please replace the battery
immediately.
PCB Layout
Antenna
Sensitivity setting
Mode setting
Tamper switch
Sensitivity Setting
Take off the back case with screwdriver, and put the black jumper
cap onto the jumper of required sensitivity level.
High sensitivity Medium Sensitivity Low sensitivity
Connecting to the Control Panel
Please connect the detector with control panel before use:
1. Make sure the control panel is under pairing state (please refer to
the relative user manual).
2. Knock once on the surface of the detector to simulate an alarm (LED
the pairing is successful.
Installation
1. Remove the insulating strip; the detector will enter working state.
2. Clean the surface of object to be installed.
3. Fix the detector on the middle of the object’s surface with double-
sided adhesive tape and make sure the antenna is upward.
Note: Whether a vibration signal will be detected depends on not only the knocking
strength on objects, but also the strength, frequency and duration of the signal.
Power Supply: DC 3 V (AAA 1.5 V LR03 x 2 PCS)
Static Current: < 29 uA
Alarm Current: < 22.2 mA
Transmitting Distance: < 80 m (in open area)
Radio Frequency: 868 MHz
Housing Material: ABS plastic
Operation Condition:
Temperature: 0°C ~ +55°C
Relative Humidity: < 80% (non-condensing)
Detector Dimensions (L x W x H): 54 X 14.5 X 107 mm
Introduction
détection de vibrations, d'un contact ou d'un déplacement. Toute
vibration détectée déclenche l'envoi automatique d'un signal
Sa sensibilité aux vibrations est
Deux piles de type AAA ou LR03 de 1,5
V sont
fournies avec le détecteur et garantissent une autonomie en veille
de 12 mois.
Vue d'ensemble du produit
Indicateur lumineux
les fausses alarmes.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chacon 34952 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chacon 34952 in the language / languages: English, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info