622510
1
Zoom out
Zoom in
Previous page
1/7
Next page
Bedienungsanleitung Nr. 9999-041-0
Seite 1
B7202_E_1.pmd
12.06.2003
Electronic lock 7202
Fig. 1
Contents:
1. Important notes
1.1 Explanation of terms
1.2 General
2. Opening the electronic lock
3. Closing the electronic lock
4. Time-out following erroneous entries
5. Correction with the „C“ button
6. Battery charge monitoring, replacing the battery
7. Emergency opening
8. Programming the electronic lock
8.1 Programming the master combination
8.1.1 Programming a new primary combination using the
emergency opening lock
8.2 Programming a user combination
8.2.1 Deleting a user combination
8.3 Programming a timed delay period
8.3.1 Opening the lock with the timed delay function
activated
8.3.2 Deleting a timed delay period
8.4 Programming a time-lock period
8.4.1 Starting a time-lock period
8.5 Activating a combination interlock
8.5.1 Opening the lock with an interlock activated
8.5.2 Deleting an interlock
8. Triggering a silent alarm
10. Troubleshooting
1. Important notes
Please read these instructions carefully and
completely before putting the lock in operation.
Replace the 0 _ 1 2 3 4 5 6 factory combination
immediately by programming your own master
combination; see Section 8.1.
Do not use any personal data for your new master or
user combination.
The maximum permissible interval between any two
keypad entries is 30 seconds. If this limit is exceeded,
then the entire procedure will have to be repeated
from the beginning.
1.1 Explanation of terms
The following terms and symbols are used:
User number = User number (abbreviated UNo.)
UNo. = 0 for master
UNr. = 1 to 5 für users
Code = A series of digits,
e.g. 4 7 6 2 3 9
Combination =
A series of digits required to open
the lock. It comprises the:
User number and code:
Example for the master combination
0 _ 6 5 4 7 2 1
Example of a user combination
3 _ 8 7 9 5 8 3
Factory
combination = The initial combination, programmed at
the factory. The combination for this
electronic lock has been pre-set to
0 _ 1 2 3 4 5 6
Master
combionation = Combination used by the master to
open the lock
User
combination = Combinations for additional users.
All user combinations are subordinate
to the master combination.
P - No. = Program number
LED = Light-emitting diode at the keypad.
Note =
Caution =
A signal tone sounds each time a button is pressed.
A 10-second time-out period will be started after
invalid combinations have been entered in three
consecutive attempts.
Do not damage the inspection seal on the lock as the
guarantee will otherwise be invalidated.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CAWI 7202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CAWI 7202 in the language / languages: French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of CAWI 7202

CAWI 7202 User Manual - German - 8 pages

CAWI 7202 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info