Manual Casio GW3500B-1A-5121 (page 3 of 6) (English)

563576

Zoom out

Zoom in

1/6

Operation Guide 5121

To select a mode

Press C to cycle between the modes as shown below. The

Left Dial Hand

indicates the currently selected mode.

Timekeeping Mode Stopwatch Mode

The hand indicates the day

of the week.

The hand points to 0.

World Time Mode

The hand points to STD

or DST.

Alarm Mode

The hand points to ALM.

Timekeeping

Use the Timekeeping Mode to view the current time and date. To enter the

Timekeeping Mode from any other mode, hold down C at least two seconds.

Hand Functions

z Hour Hand

x Second Hand

c Minute Hand

v Left Dial Hand: Indicates the day of the week.

b 24-hour Hand:

Indicates the current 24-hour timekeeping hour.

n Right Dial Hands:

Indicate the current time in the World Time City in

24-hour format.

m Day

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁ gure Home City settings

Note

This watch does not have a city code that corresponds to •

Newfoundland.

In the Timekeeping Mode, keep 1. A depressed (for about

ﬁ ve seconds) as the

Second Hand goes through the

following sequence.

Moves to • YES (or Y for some models) or NO (N) to

indicate the last signal reception result, then to READY

(R), and then to the city code of the currently selected

Home City.

This is the city code setting mode. •

The watch will exit the setting mode automatically if you do not perform any •

operation for about two or three minutes.

For details about city codes, see the “City Code Table”. •

To change the Home City setting, press 2. D to move the

Second Hand clockwise.

Keep pressing • D until the

Second Hand is pointing

at the city code you want to select as your Home City.

Each time you change the city code setting, the •

Hour Hand,

Minute Hand,

24-hour Hand and

Day move to the current time and date for that city

code. Do not perform the next operation until these

hands stop moving.

Press 3. B to toggle the time for the currently selected

city code between STD (standard time)/DST (daylight

saving time).

While you are selecting the Home City code, the •

Left Dial Hand will indicate

whether the currently selected city code is conﬁ gured for standard time (STD) or

daylight saving/summer time (DST).

Note that you cannot switch between • STD (standard time)/DST (daylight saving

time) while UTC is selected as your Home City.

After all the settings are the way you want, press 4. A to return to the Timekeeping

Mode.

To toggle the Home City time between standard time and daylight saving time

Perform the step 1 under “To conﬁ gure Home City settings”.1.

Each time you select a city code, the •

Hour Hand,

Minute Hand, and

24-hour Hand move to the current time for that city code. Do not perform the

next operation until these hands stop moving.

While you are selecting the Home City code, the •

Left Dial Hand will indicate

whether the currently selected city code is conﬁ gured for standard time (STD) or

daylight saving/summer time (DST).

Press 2. B to toggle the time for the city code of the currently selected Home City

between STD (standard time)/DST (daylight saving time).

Note that you cannot switch between • STD (standard time)/DST (daylight saving

time) while UTC is selected as your Home City.

After the setting is the way you want, press 3. A to return to the Timekeeping Mode.

Note

After you specify a city code, the watch will use UTC* offsets to calculate the •

World Time based on the current time in your Home City.

Selecting some city codes makes it possible for the watch to receive the time •

calibration signal for the corresponding area automatically. See “Radio Controlled

Atomic Timekeeping” for details.

Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping. *

The reference point for UTC is Greenwich, England.



B +

* 6> 5



B +

*> 5

Conﬁ guring Current Time and Date Settings Manually

You can conﬁ gure current time and date settings manually when the watch is unable

to receive a time calibration signal.

To change the current time setting manually

In the Timekeeping Mode, keep 1. A depressed (for about

ﬁ ve seconds) as the

Second Hand goes through the

following sequence.

Moves to • YES (or Y for some models) or NO (N) to

indicate the last signal reception result, then to READY

(R), and then to the city code of the currently selected

Home City.

The •

Left Dial Hand will indicate whether the

currently selected city code is conﬁ gured for standard

time (STD) or daylight saving/summer time (DST).

Change the Home City and daylight saving time (DST) settings, if you want.2.

For details about these settings, see steps 2 and 3 under “To conﬁ gure Home •

City settings”.

In the following steps, each press of • C cycles between settings as shown below.

Home city/DST Hour/Minute

Year

(tens digit)

Day Month

Year

(ones digit)

Press 3. C.

The •

Second Hand will move to 12 o’clock. This is

the time setting mode.

Use 4. D (+) and B (–) to change the time (hour and

minute) setting.

Each press of either button will move the hands •

(

Hour Hand and

Minute Hand) one minute.

Holding down • D or B will start high-speed

Hour

Hand and

Minute Hand movement in the applicable

direction. To stop high-speed hand movement, press

any button.

The •

24-hour Hand and

Hour Hand move in sync

with each other.

When setting the time, make sure that the •

24-hour Hand indicates the proper

a.m./p.m. hour.

If you want to change the date setting at this time, press • C and perform the

procedure starting from step 3 under “To change the current date setting

manually”.

After the time setting is the way you want, press 5. A to return to regular

timekeeping.

This will cause the •

Second Hand to move automatically to 12 o’clock and

resume movement from there.

To change the current date setting manually

Setting the year (tens digit)

In the Timekeeping Mode, keep 1. A depressed

(for about ﬁ ve seconds) as the

Second Hand

goes through the following sequence.

Moves to • YES (or Y for some models) or NO (N)

to indicate the last signal reception result, then

to READY (R), and then to the city code of the

currently selected Home City.

Press 2. C twice.

The •

Second Hand will move to the tens digit

of the current year setting. This is the year

setting mode.

The year can be set in the range of 2000 to •

2099.

Setting the year (ones digit)

Press 3. D to move the

Second Hand clockwise

until it is pointing at the year tens digit you want

to select.

After you select the year tens digit, press 4. C.

The •

Second Hand will move to the ones digit

of the current year.

Press 5. D to move the

Second Hand clockwise

until it is pointing at the year ones digit you want

to select.

Dec

May

Jan

Apr

Feb

MarSep

Jun

Aug

Jul

Setting the month

Oct

Nov

After you select the year ones digit, press 6. C.

The •

Second Hand will move to the currently

selected month. This is the month setting

mode.

Use 7. D to move the

Second Hand to the

month setting you want.

After the month setting is the way you want, 8.

press C.

The •

Second Hand will move to 12 o’clock,

and the watch will enter the day setting mode.



B +

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio GW3500B-1A-5121 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio GW3500B-1A-5121 Manual

Product: