563576
2
Zoom out
Zoom in
Previous page
1/6
Next page
2
Operation Guide 5121
Approximate Reception Ranges
UK and German Signals North American Signal
Anthorn
500 kilometers
1,500 kilometers
Main ingen
The Anthorn signal is receivable
within this area.
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
Japanese Signals Chinese Signal
Fukushima
500 kilometers
1,000 kilometers
Fukuoka/Saga
1,500 kilometers
Changchun500 kilometers
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
Even when the watch is within range of a transmitter, signal reception may be
impossible due to the effects of geographic contours, structures, weather, the time
of year, the time of day, radio interference, etc. The signal becomes weaker at
distances of approximately 500 kilometers, which means that the in uence of the
above conditions becomes even greater.
Signal reception may not be possible at the distances noted below during certain
times of the year or day. Radio interference may also cause problems with
reception.
Main ingen (Germany) or Anthorn (England) transmitters: 500 kilometers
(310 miles)
Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)
Shangqiu (China) transmitter: 500 kilometers (310 miles)
As of November 2009, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
Using this watch in a country covered by a time calibration signal that is different
from the countries it supports may result in incorrect time indication due to local
application of summer time, etc.
To get ready for a receive operation
Con rm that the watch is in the Timekeeping Mode. If it isnt, hold down 1. C at least
two seconds to enter the Timekeeping Mode.
The antenna of this watch is located on its 12 oclock side. Position the watch with 2.
12 oclock facing towards a window as shown in the nearby illustration. Make sure
there are no metal objects nearby.
12 oclock
or
Signal reception normally is better
at night.
The receive operation takes from two
to seven minutes, but in some cases
it can take as long as 14 minutes.
Take care that you do not perform
any button operation or move the
watch during this time.
Signal reception may be dif cult or even impossible under the conditions
described below.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
of ce
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near
high-tension
power lines
Among
or behind
mountains
What you should do next depends on whether you are using Auto Receive or 3.
Manual Receive.
Auto Receive: Leave the watch over night in the location you selected in step 2.
See Auto Receive for details.
Manual Receive: Perform the operation under To perform manual receive.
Auto Receive
With Auto Receive, the watch performs the receive operation each day automatically
up to six times (up to ve times for the Chinese calibration signal) between the
hours of midnight and 5 a.m. (according to the Timekeeping Mode time). When any
receive operation is successful, none of the other receive operations for that day
are performed.
When a calibration time is reached, the watch will perform the receive operation only
if it is in the Timekeeping Mode or World Time Mode. The receive operation is not
performed if a calibration time is reached while you are con guring settings.
To perform manual receive
In the Timekeeping Mode, keep 1. A depressed (for about two seconds) as the
x
Second Hand goes through the following sequence.
Moves to YES (or Y for some models) or NO (N) to indicate the last signal
reception result, then to READY (R).
The 2.
x
Second Hand indicates the operations the watch is currently performing.
When the
x
Second
Hand is pointed here:
It means this:
READY (R) Watch is setting up for reception.
WORK (W) Reception is in progress.
YES (Y)
Reception was completed
successfully.
NO (N) Reception failed for some reason.
If signal reception is unstable, the
x
Second Hand may
move between WORK (W) and READY (R).
The receive operation is complete when the 3.
x
Second
Hand moves to YES (Y) or NO (N) for about ve
seconds, and then resumes regular timekeeping.
You can return to the Timekeeping Mode manually by
pressing A while the
x
Second Hand is pointing to
YES (Y) or NO (N).
When the receive operation is successful, the watch
adjusts the time setting accordingly. It does not adjust
the setting if the operation failed.
Note
To interrupt a receive operation and return to the
Timekeeping Mode, press any button.
To check the result of the latest receive operation
In the Timekeeping Mode, press A.
The
x
Second Hand will move to YES (Y) for ve
seconds if the latest receive operation was successful,
or NO (N) if it was not. After that, regular timekeeping
will resume.
You can return to the Timekeeping Mode manually by
pressing A while the
x
Second Hand is pointing to YES
(Y) or NO (N).
Note
The
x
Second Hand will indicate NO (N) if you have
adjusted the time or date setting manually since the latest
receive operation.
Radio-controlled Atomic Timekeeping Precautions
Strong electrostatic charge can result in the wrong time setting.
Even if a receive operation is successful, certain conditions can cause the time
setting to be off by up to one second.
The watch is designed to update the date and day of the week automatically for
the period January 1, 2000 to December 31, 2099. Updating of the date by signal
reception will no longer be performed starting from January 1, 2100.
If you are in an area where signal reception is not possible, the watch keeps time
with the precision noted in Speci cations.
The receive operation is disabled under any of the following conditions.
While power is at Level 2 or lower
While the watch is in the power recovery mode
When the watch is in the function sleep state (Power Saving)
A receive operation is cancelled if an alarm sounds while it is being performed.
Mode Reference Guide
Your watch has four modes. The mode you should select depends on what you
want to do.
To do this: Enter this mode:
View the current time in your Home City and in one of 29 other cities
around the globe
View the current date in the Home City
Con gure Home City and daylight saving time (DST) settings
Perform a time calibration receive operation
Con gure time and date settings manually
Timekeeping Mode
Use the stopwatch to measure elapsed time Stopwatch Mode
Select one of 29 cities (time zones) around the world and view the
current time there
Select daylight saving/summer time (DST) or standard time for a
time zone
World Time Mode
Set an alarm time Alarm Mode
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch’s current mode
Check the position of the
v
Left Dial Hand as shown
under To select a mode.
To return to the Timekeeping Mode from any other
mode
Except while the watch is performing auto hand home
position correction, hold down C at least two seconds until
the
x
Second Hand returns to 12 oclock.

@

@

@

>
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio GW3500B-1A-5121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio GW3500B-1A-5121 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info