522110
1
Zoom out
Zoom in
Previous page
1/5
Next page
Operation Guide 4732 4733
1
MO0605-EA
Warning!
The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.
When fishing, always take proper precautions to ensure your own personal safety
and the personal safety of others around you.
The fishing level indicator and moon phase indicator produced by this watch are
all based on calculations that use the watch’s current time, date, and Home Site
settings. Because of this, you should make sure that the current date and time,
and your Home Site data are all correct before using the indicators.
See the “Timekeeping” section of this manual for information about setting the
current time and date, and about specifying your Home Site.
Note that the fishing level indicator and moon phase indicator are all based on
calculated values. They are provided only for reference purposes.
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
claims by third parties that may arise through the use of this watch.
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
Depending on the model of your watch, display text
appears either as dark figures on a light background
(Module 4732), or light figures on a dark background
(Module 4733). All sample displays in this manual are
shown using dark figures on a light background.
Button operations are indicated using the letters shown
in the illustration.
For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Module 4732
Module 4733
(Light)
General Guide
Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Temperature Data
Recall Mode
Stopwatch Mode
World Time Mode
Fishing Mode
Countdown Timer
Mode
Alarm Mode
Press C.
Hand Setting Mode
Timekeeping Mode
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.
In the Timekeeping Mode, press A to toggle between the thermometer screen and
the temperature tendency screen.
The fishing level indicator indicates the times when fish can be expected to be feeding.
For more information, see
Fishing Mode
”.
Temperature Tendency
Screen
Temperature
tendency
graph
Day of
week
Day
PM
indicator
Hour : Minutes
Moon phase
indicator
Fishing level
indicator
Press A.
Thermometer Screen
Temperature
Seconds
The Moon phase indicator shows the current Moon phase in accordance with the
current date as kept in the Timekeeping Mode.
See Thermometer for details about the thermometer screen and temperature
tendency graph.
Important!
Be sure to configure the current time and date, and your Home Site data (data for
the site where you use the watch) correctly before using the functions of this watch.
See Home Site Data for more information.
Setting the Digital Time and Date
This watch is preset with UTC differential values that represent each time zone around
the globe. Before setting the digital time, be sure to first set the UTC differential for
your Home Site, which is the location where you normally will be using the watch.
Note that World Time Mode times are all displayed based on the time and date
settings you configure in the Timekeeping Mode.
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
Be sure to configure the correct UTC differential for
your Home Site before configuring any other
Timekeeping Mode settings.
See the UTC Differential/City Code List for
information about the UTC differential settings that are
supported.
2. Press C to move the flashing in the sequence shown
below to select the setting you want.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds
Hour
UTC
Differential
Minutes
Year
DST
Day
Month
Seconds
Temperature
Unit
12/24-Hour
Format
Temperature Sensor
Calibration
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen:
To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time (ON) and Standard Time (OF)
Specify the UTC differential
Change the hour or minutes
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping
Do this:
Press D.
Press D.
Use D (+) and B ().
Use D (+) and B ().
Press D.
Use D (+) and B ().
Change the year, month, or day
The UTC differential setting range is 12.0 to +14.0 in 0.5-hour units for Standard
Time (DST turned off), and 11.0 to +15.0 in 0.5-hour units for summer time (DST
turned on).
For information about settings other than the time and date, see the following.
Temperature Sensor Calibration: Thermometer
Temperature Unit: To specify the temperature display unit
4. Press A twice to exit the setting screen.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
See Daylight Saving Time (DST) Setting below for details about the DST setting.
Any time the seconds setting is changed, the analog hands are adjusted accordingly.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OF displayed).
4. Press A twice to exit the setting screen.
The DST indicator appears on the Timekeeping, Fishing,
Alarm, and Hand Setting Mode screens to indicate that
Daylight Saving Time is turned on. In the case of the
Fishing Mode, the DST indicator appears on the fishing
level screen only.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
On/Off status
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 4732 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 4732 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 4732

Casio 4732 User Manual - German - 5 pages

Casio 4732 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info