816449

Carat Microcoup 180 Manual

2
Zoom out
Zoom in
Previous page
1/10
Next page
2
Contents
Safety instructions
Machine specification & electrical requirements
Assembly & operating instructions
Maintenance & warranty
Safety instructions
To use this tool correctly, you must observe the safety
regulations, the assembly instructions and the operation
instructions contained in this manual.
All persons who use and service the machine must be
acquainted with this Manual and must be informed about any
potential hazards.
Children and infirm people must not use this tool. Children
must be supervised at all times if they are in the area in which
the tool is being used.
It is also imperative that you observe the accident prevention
regulations in force in your area. The same applies for general
rules of occupational health and safety.
Take suitable precautions to protect your eyes, ears, lungs
and hands when operating the Wet Saw.
Keep children and others away from the machine whilst in
use.
Only use circular blades with a continuous rim – DO NOT
USE segmented circular blades, saw blades or abrasive
disks.
The machine should be used indoors only, in a clean, dry,
well lit area and on a clutter free, flat work surface.
Avoid wearing loose clothing, ties, rings, bracelets or other
loose items which may become caught in the moving parts.
Long hair should also be tied back or contained.
Always ensure that all loose tools and components are
removed from the immediate working area.
Switch machine off between cuts and disconnect from
mains supply before carrying out any maintenance,
cleaning or changing the blade.
Do not leave the saw running unattended or touch the
blade whilst in motion – always use the blade guard when
cutting.
Replace damaged blades immediately and ensure that
new blades are fitted correctly to run in the direction
indicated on the blade.
Only recommended replacement parts should be used with
this machine – use of improper accessories could cause
serious injury.
Automatic Overload Protection
To prevent overheating this machine has automatic overload
protection which is designed to cut power to the motor.
Should the automatic overload protection trip, ensure that
mains power supply and machine switch are turned off.
After ten seconds press the breaker button next to the main
switch and restart the machine.
Machine Specification
Power Supply 240V 50Hz
Motor 750W
RPM (No load) 2800 RPM
Maximum Sound Level* 95 dB (A)
Maximum Depth of Cut (with new
blade) 25mm
Maximum Depth of Cut at 45° (with
new blade) 17mm
Mitre Cutting Angle 15°/30°/45° degrees
Cutting Angles 0°-45° degrees
Machine & Accessories packaged
weight 15 kg
*Note: If the sound intensity level exceeds 85 db (A) ear protection should
be worn by the operator
Ensure that the mains voltage corresponds to the instruction
plate – a single phase socket with two contacts and an earth is
obligatory.
Use of an approved PRCD circuit breaker between the
machine and the electrical power point is highly
recommended.
To reduce the risk of unintentional starting, make sure
that the switch is in the OFF position before plugging in.
Repair or replace damaged or worn cable immediately
after first disconnecting from mains supply.
Electrical faults must only be carried out by a qualified
electrician.
The contents of the box should include the following (See
picture below):
oMicrocoup 180 alu
o180mm Diamond Blade
oBlade guard set comprising of bolt, wing nut, guard
support and blade guard
oRip Guide
oVariable angle Mitre Guide
oWrench
oOwner’s Safety & Operating Manual
IMPORTANT
Your new Carat Microcoup 180 Alu has a Super Quiet
Induction Motor for ultra smooth cuts. For best results
allow the blade to do the work, rather than forcing the tile
through the machine. Should the blade stop, simply ease
the tile away and then continue cutting using slightly less
pressure.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat Microcoup 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat Microcoup 180 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info