583171
1
Zoom out
Zoom in
Previous page
1/2
Next page
Series
Photo Printer
Start Here
Easy Setup Instructions
1Unpack the Printer 2Prepare the Printer 3Install the FINE Cartridges 4Align the Print Head (FINE Cartridge)
Carefully remove all items from the box.
Documentation and
Software Kit
Photo FINE Cartridge
(CL-52)
Color FINE Cartridge
(CL-51)
Power Cord
PIXMA iP6210D Photo Printer
Remove the shipping tape from the front and back of the
printer.
Open (a) the card slot cover first and (b) the front cover next,
Pull down and remove the protective material on the right
side.
Close the front cover first and the card slot cover next.
Plug the power cord into the back of the printer and connect
the other end to a power outlet.
Press the POWER button. The printer will initialize. Wait until
the POWER lamp remains fully lit.
NOTE: Do not connect the USB cable at this stage.
When the screen appears on the LCD, confirm a language
and then press the OK button.
Open the card slot cover first and the front cover next.
The FINE Cartridge holder automatically moves to the left.
Write down the serial number. You will need this to register
the product.
6
5
4
3
2
1
Take out the Color FINE Cartridge (CL-51) from its box and remove the protective
tape gently.
NOTE:
·Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. The
printer may not print out properly if you touch it.
·Do not reattach the protective tape once you have removed it.
·Handle the removed protective tape carefully to avoid getting your hands dirty or
staining surrounding work area.
Insert the Color FINE Cartridge slightly slanted into the left slot (C).
Push up the Color FINE Cartridge until it clicks into place.
IMPORTANT: For correct printer operation, make sure the FINE Cartridge is secure in
slots.
Repeat the procedure for the Photo FINE Cartridge (CL-52), inserting it into the
right slot (P).
Close the front cover first and the card slot cover next.
IMPORTANT: Wait until the preparatory operation is complete; this takes about one
to two minutes.
The message requesting head alignment is displayed on the LCD.
Go to the next step.
5
4
3
2
1
Open the paper support and pull out the paper output tray.
Pinch the paper guide and slide it to the left. Load a few
sheets of blank paper into the auto sheet feeder, then slide
the paper guide toward the left edge of the paper.
NOTE: Ensure that the paper thickness lever is set to the left
position.
Ensure that the message requesting head alignment is dis-
played on the LCD, select YES using the buttons and
press the OK button.
The pattern is printed. And the print head is aligned
automatically.
IMPORTANT: It takes about four minutes to finish printing.
When automatic print head alignment can not be execut-
ed correctly, the message "HEAD ALIGNMENT ERROR" is
displayed on the LCD. refer to "An Error Message is
Displayed in the LCD" in the Direct Printing Guide.
3
2
1
Print head nozzles
Electrical contacts
Continue with Step 5
on side two.
Power cord
To the FINE Cartridge holder
Paper support
Paper output tray
FINE Cartridge
holder
Paper thickness lever
Protective material
Serial number
Protective tape
(b) Front cover
Paper guide
Print side
Auto sheet feeder
(a) Card slot cover
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP6220D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP6220D in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP6220D

Canon Pixma iP6220D User Manual - English - 60 pages

Canon Pixma iP6220D Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info