424035

Canon fax eb10 Manual

5
Zoom out
Zoom in
Previous page
1/156
Next page
v
■■
■■
■ Location
• Place the fax on a flat, stable, vibration-free surface that is strong enough to support its weight (approx.
5.8 kg).
• Place the fax in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not affected by extreme temperature changes, and always stays between 10° and
32.5°C.
– Make sure the area’s relative humidity is always between 20% and 85%.
• Keep the fax away from direct sunlight as this can damage it. If you have to place it near a window, install
heavy curtains or blinds.
• Do not use the fax near water. Make sure that no wet or humid objects come into contact with the fax.
• Do not use or store the fax outdoors.
• Do not install the fax near devices that contain magnets or generate magnetic fields, such as speakers.
• If possible, place the fax near an existing telephone outlet to avoid the expense of installing a new one.
• Place the fax near a standard 200–240 V AC power outlet.
• To ensure reliable operation of the fax and to protect it from overheating (which can cause it to operate
abnormally and create a fire risk), do not block the exhaust vent and never block or cover any openings on the
fax by placing it on a bed, sofa, rug, or other similar surface. Do not place the fax in a cupboard or built-in
installation, or near a radiator or other heat source unless proper ventilation is provided. Install the fax
approximately 10 cm away from walls and other equipment. For the dimensions of the fax, see p. S-1.
• Do not stack boxes or furniture around the power outlet. Keep the area free so you can reach the outlet
quickly. If you notice anything unusual (smoke, strange odours, noises) around the fax, unplug it immediately.
Contact your local authorised Canon dealer or the Canon help line.
• Do not allow anything to rest on the power cord, and do not place the fax where the cord will be walked on.
Make sure the cord is not knotted or kinked.
■■
■■
■ Power supply
• During electrical storms, disconnect the power cord from the power outlet. (Please note that any documents
stored in the fax’s memory will be deleted when you unplug the fax.)
• Whenever you unplug the fax, wait at least five seconds before you plug it in again.
• If dust accumulates around the plug of the power cord when it is connected to a power outlet, unplug the fax
and wipe the plug with a clean, dry cloth.
This product emits low level magnetic flux.
If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your
doctor.
Important safety instructions
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax eb10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax eb10 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info