19948
19
Zoom out
Zoom in
Previous page
1/31
Next page
4.2.2 Logic section components
1) MPU (IC2)
The MPU contains a 16-bit CPU, 1K-bit RAM, 24-bit address bus port, 16-bit data bus port, stepping
motor controller, interrupter controller, A-D converter, I/O ports, and other components.
Built-in CPU
The 16-bit CPU operates in synchronization with a 20 MHz external clock input.
Address bus
The 24-bit address bus port is connected to an 8 M-bit control/CG ROM and printer controller. The
controller/CG ROM synchronizes with the read signals output by the MPU and the 20 MHz clock
signal. The printer controller then selects the chip.
Data bus
Like the address bus, the 16-bit data bus port is connected to the 8 M-bit control/CG ROM and printer
controller.
Stepping motor controller
The stepping motor controller outputs double 1-2 phase exciter drive signals to both the carriage motor
driver and paper feed motor driver.
The stepping motor controller can switch the the 4-step peak current value of both motor driver.
Interrupt controller
For external interruption, the MPU has ports P80, 81, 84, 85, and 87 to receive the POWER button
on/off switching, data reception, initial interrupt request, receive buffer-full warning, and other signals.
The MPU executes interrupt processing for the respective signals.
A-D converter
The following analog signals are detected after they pass through the built-in A-D converter:
AN0: The printer's internal temperature is detected by the thermistor on the logic board.
AN1: The head temperature is detected by the head temperature sensor in the BJ cartridge.
AN3: The head rank is detected by the rank resistor in the BJ cartridge.
I/O port
The setting status determined by the head ID, paper end sensor, home position sensor, and pick-up
roller sensor are input through the input ports. The buzzer, BJ cartridge detection, head-driving voltage
control, and other signals are output from the output ports.
4-39
BJC-4400
Part 4: Technical Reference
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon BJC4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon BJC4400 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info