656740
13
Zoom out
Zoom in
Previous page
1/14
Next page
851Wazur
ENGLISH
13
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
There is no sound
Make sure the unit is not in Standby mode.
Check that your source component is properly connected.
Check that your loudspeakers are properly connected.
Check that the Left and Right Input Type switches are in the correct
position (Balanced or Unbalanced).
Check that the Stereo/Mono mode switch is in the correct position
(Stereo or Mono).
Check that the Mono mode switch is in the correct position (Bi-Amp or
Bridged).
There is no sound on one channel
Check that your source component is properly connected.
Check that your loudspeakers are properly connected.
Check that the Left and Right Input Type switches are in the correct
position (Balanced or Unbalanced).
Check that the Stereo/Mono mode switch is in the correct position
(Stereo or Mono).
Check that the Mono mode switch is in the correct position (Bi-Amp or
Bridged).
There is a loud buzz or hum
Ensure that no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the unit.
There is weak bass or diffused stereo imaging
Ensure that the loudspeakers are not wired out of phase.
For more frequently asked questions (FAQs), technical advice and
information on getting the most out of your 851W, please visit the
Support section on Cambridge Audio’s website:
http://techsupport.cambridgeaudio.com
Power Output - Stereo/Mono 200W per channel 8 Ohms
350W per channel 4 Ohms
Power Output - Bridged Mono 500W 8 Ohms
800W 4 Ohms
THD (unweighted) < 0.001% 1kHz
< 0.005% 20Hz - 20kHz
Frequency Response 5Hz - 80kHz
±
1dB
S/N ratio (ref 1W/8 Ohm) > 90 dB (unweighted)
Sensitivity Stereo or Mono = (for 200W 8 Ohms)
1.5V rms unbalanced 1.5 + 1.5V rms
balanced
Bridged Mono = 0.775V rms
unbalanced 0.775V + 0.775V rms
balanced
Input impedances Balanced input 38 kOhm
Unbalanced input 68 kOhm
Damping factor > 125 at 1 kHz
Trigger In 5 - 12V AC or DC
Trigger Out 12V DC @ 100mA
Power consumption Maximum 2400W
Active (no signal) < 180W
Standby < 0.5W
Dimensions (H x W x D) 148 x 430 x 365mm
(5.8 x 16.9 x 14.4”)
Weight 19.1kg (42.1lbs)
Technical specications Troubleshooting
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio AZUR 851W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio AZUR 851W in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio AZUR 851W

Cambridge Audio AZUR 851W User Manual - German - 13 pages

Cambridge Audio AZUR 851W User Manual - Dutch - 13 pages

Cambridge Audio AZUR 851W User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info