656740
12
Zoom out
Zoom in
Previous page
1/14
Next page
12
Conguration menu
In Standby mode, press and hold the Standby/On button to enter the
Conguration menu.
The Left and Right ‘Output’ LED will start blinking to indicate that you are
now in the Conguration menu.
Pressing the Standby/On button will shufe through these different
setting options:
Right ‘Protection’ LED - Auto power down enabled (by default).
Right ‘Protection’ and ‘Clipping’ LED - Auto power down and auto power
up enabled.
Left and Right ‘Output’ LED - All features are now disabled.
To exit the Conguration menu, press and hold the Standby/On button.
Note: If a second 851W is added to the chain, the below conguration
menu is applicable only to the second unit.
(When used in conjunction with a Pre-amplier such as the 851E through
the Control Bus, each 851W needs to be identied individually for fault
reporting.)
Left ‘Protection’ LED - Second 851W enabled.
Left and Right ‘Protection’ LED - Second 851W auto power down enabled.
Left ‘Protect’ and Right ‘Protect and Clipping’ - Auto power down and
auto power up enabled.
Powering On/Off the 851W
As well as simply using the front panel button the 851W features multiple
ways it can be automatically powered on and off.
A trigger 5-12V AC or DC input to the Trigger In on the rear panel can
power up or down the unit from custom install systems or preamps with
trigger outputs. This is an ‘edge triggered’ input so that the 851W will
power on with a zero-to-positive voltage transition and power down with
a positive voltage to zero transition.
Alternatively the 851W features a Control Bus Input for use with our
matching 851E preamp that allows a single RCA/Phono to RCA/Phono
cable to be connected between them that allows the 851E preamp to
communicate with the 851W and automatically control its power status.
For custom install situations it is also possible to send Infra Red or
Control Bus commands (see our website for the code table) to the 851W
and also affect power control.
Lastly the 851W can sense its audio inputs and will instantly cause the
unit to power up and conversely Auto-Power Down if no signal has been
present for 30 mins.
To enable/disable Auto Power Up/Auto Power Down see the next section
on the hidden conguration menu.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cambridge Audio AZUR 851W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio AZUR 851W in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio AZUR 851W

Cambridge Audio AZUR 851W User Manual - German - 13 pages

Cambridge Audio AZUR 851W User Manual - Dutch - 13 pages

Cambridge Audio AZUR 851W User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info