699206
4
Zoom out
Zoom in
Previous page
1/24
Next page
RMD 801DAB-BT MANUAL
2
SAFETY PRECAUTIONS
Important Warnings to Take Note of BEFORE Commencing Installation
Damage Caused By Incorrect Installation or Usage is NOT Covered By Warranty.
PLEASE Take the Time to Read the Installation Notes Carefully.
To Validate the Warranty Please Ensure That the Unit is Installed by a Professional, VAT registered
Car Audio Installation Company.
To avoid short in your vehicles electrical system, be sure to disconnect the battery cable before beginning installation.
The unit is intended for vehicles with a 12-volt battery and negative grounding. Before installing the unit in a recreational vehicle,
truck, or bus, check that the battery voltage is 12 volts.
Remove the two transport screws from the top of the unit before installation.
The black lead is ground. A good chassis ground requires a tight connection to ground. The area should be free from rust, paint or
any form of dirt. Please ground this lead separately from the ground of high-current products such as power amps. If you ground the
products together and the ground becomes detached, there is a risk of damage to the products or fire.
Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or
damage the vehicle’s electrical system. Cords for this product and those for other products may be different colours even if they have
the same function. When connecting this product to another product, refer to the supplied installation manuals of both products and
connect cords that have the same function.
Be sure to connect the negative (-) speaker leads to the negative (-) speaker terminal. Never connect the negative (-) speaker leads
to chassis ground.
This unit is only designed for use with 4 speakers. Do not combine outputs for use with 2 speakers. Do not ground negative speaker
leads to the chassis ground.
Speakers connected to this unit must be high-power units with a minimum rating of 45W and impedance of 4 to 8 ohms. Connecting
speakers with output and/or impedance values other than those noted there will result in damage to the head unit and the speakers.
Check the condition off your speakers carefully - connecting the unit to old of degraded speakers may result in a fault which
will damage the audio IC and invalidate the warranty.
If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should
be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained
when you are away from the vehicle for several hours.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RMD801DAB-BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RMD801DAB-BT in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RMD801DAB-BT

Caliber RMD801DAB-BT Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info