536888
3
Zoom out
Zoom in
Previous page
1/17
Next page
RMD 212BT Manual
3
Owner’s Manual
Important Warnings to Take Note of BEFORE Com-
mencing Installation
Damage Caused By Incorrect Installation or Usage is
NOT Covered By Warranty. PLEASE Take The Time To
Read The Installation Notes Carefully.
To Validate The Warranty Please Ensure That The Unit
Is Installed By A Professional, VAT Registered Car Au-
dio Installation Company.
To avoid shorts in your vehicles electrical system, be sure
to disconnect the battery cable before beginning installa-
tion.
This unit is intended for vehicles with a 12-volt battery and
negative grounding. Before installing the unit in a recreational
vehicle, truck, or bus, check that the battery voltage is 12 volts.
Remove the two transport screws from the top of the unit
before installation.
The black lead is ground. A good chassis ground requires a
tight connection to ground. The area should be free from rust,
paint or any form of dirt. Please ground this lead separately
from the ground of high-current products such as power amps.
If you ground the products together and the ground becomes
detached, there is a risk of damage to the products or fire.
Be sure to connect the colour coded leads according to the dia-
gram. Incorrect connections may cause the unit to malfunction
or damage the vehicle’s electrical system. Cords for this product
and those for other products may be different colours even if they
have the same function. When connecting this product to an-
other product, refer to the supplied installation manuals of both
products and connect cords that have the same function.
• Be sure to connect the negative (-) speaker leads to the nega-
tive (-) speaker terminal. Never connect the negative (-) speaker
leads to chassis ground.
The unit is only designed for use with 4 speakers. Do not com-
bine outputs for use with 2 speakers. Do not ground negative
speaker leads to the chassis ground.
• Speakers connected to this unit must be high-power units with
a minimum rating of 45W and impedance of 4 to 8 ohms. Con-
necting speakers with output and/or impedance values other
than those noted here will result in damage to the head unit
Warnings Before Installation
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber RMD212BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber RMD212BT in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Caliber RMD212BT

Caliber RMD212BT Quick start guide - English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info