781509
2
Zoom out
Zoom in
Previous page
1/11
Next page
ENGLISH
3
ENGLISH
2
THE DIRECTION OF CAMERA OBJECTS HARD TO BE DETECTED
CONTROL BOX INSTALLATION
SELECT DRILLING POSITION FOR SENSOR AND CAMERA B,C AND E
DRILLING
SENSOR AND CAMERA INSTALLATION
B.To perform the best detecting angle, select the
position for A and D sensor with 8-13cm away
from the side, 11cm is recommended, and 20°
with the side.
A.Measure the distance between sensor A and D,
get the result “L”.
B.Mark sensor B, C and E for every 1/4 “L
interval. (Camera E should be in the middle of
the bumper)
A.Firstly, use a small driller tip to locate.
B.Drill with the original driller. Ø21MM
DRILLER FOR SENSOR HOLES AND
Ø25MM DRILLER FOR CAMERA HOLE.
A.Insert the sensors and camera into the holes
one by one and tighten them, the sensor with
metal slice must be up and down fixed instead
of right and left.The camera must be fixed with
the triangle mark upward.
B.Hide the wires in good order according to
various cars.
The camera must be fixed with the triangle mark
upward.
Vertical installation position to the ground.
Sloping installation position to the ground.
Smooth slope
Smooth round objects
Objects absorbing wave, e.g. cotton
Locate the control box in the boot, keep safe,
cool, dry and away from shake or interference.
PARK 500 manual werkdoc.qxd 28-11-2007 08:47 Pagina 2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber Park 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber Park 500 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info