781509
1
Zoom out
Zoom in
Previous page
1/11
Next page
ENGLISH
1
PARK 500 PARKING SENSOR SYSTEM
PARK 500 consists of ultrasonic sensors, camera and digital control
box. (Besides these, a outer connected display with RCA plug is
needed).The video signal is inputted into control box via VIN (video
Input) and processed by control box, then outputted to outer
connected display with RCA plug via VOUT (Video Output). This
system detects the distance between the car and back obstruction
by ultrasonic sensors fixed at rear bumper of the car, and the display
shows the back image via the camera fixed at the rear of the car.
With the change of alarm sound, figure or simulation bars as well as
the image, the driver could judge the distance to avoid accident.
INSTALLATION TOOLS
ADVISED POSITION TO INSTAL THE SENSORS
SELECT DRILLING POSITION FOR SENSOR A AND D
AB E CD
Ø 21 mm
for sensor
Ø 25 mm
for camera
A. 4 drilled holes (A, B, C, D) and camera hole
(E) should be under the same line
B. 0.5-0.8m vertically high to the ground, 0.55m
is recommended
C.Vertical, tidy surface without metal
components is preferred.
A. Choose suitable drilling position for A and D
sensor with relevant mark
PARK 500 manual werkdoc.qxd 28-11-2007 08:47 Pagina 1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caliber Park 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caliber Park 500 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info