684183
9
Zoom out
Zoom in
Previous page
1/9
Next page
9. GENERAL MAINTENANCE
Ÿ This appliance does not require scheduled maintenance.
Replacing a Blocked Jet:
Ÿ Your appliance is fitted with a specific size jet (O) to regulate the correct amount of gas.
Ÿ Should the hole in the Jet (O) become blocked, this may result in a small flame or no
flame at all. Do not attempt to clean the Jet (O) with a pin or other such device as this
may damage the orifice, which could make the appliance unsafe.
Ÿ To replace the Jet (O):. Unscrew the 3 screws on the bottom housing cover and remove
cover.
Ÿ Remove Valve base plate assembly by unscrewing the six self-tapping screws fixing it to the
Tripod housing (J) and subsequently remove the Valve (M) from the Housing simply by
sliding it out.
Ÿ The Jet (O) will now be accessible at the top of the Valve (M).
Ÿ Unscrew the Jet (O) from the Valve (M) using a suitable spanner.
Ÿ Do not use pliers on the jet as this may damage the jet, making it unusable or
impossible to remove. Screw the new jet into the valve. Do not over-tighten as this may
damage the jet.
Ÿ Re-fit the valve and baseplate in the reverse order of assembly. When re-fitting the
valve, ensure that the valve spindle aligns with slot in the Tripod housing.
Ÿ Reconnect the gas supply as described in the Assembly Instructions
Replacing the Hose:
Ÿ The fitting of a hose is described in Section 6 - Assembly of the Appliance.
10. CLEANING
Ÿ Note: For Parts Reference (See Fig.2)
For Skottel Braai
Ÿ After cooking, leave the burner on low with soapy water in the cooking dish to soften cooking residue. When satisfied that e xcess fat has
been removed, wash the Skottel BBQ (A) in warm water using a suitable non-abrasive detergent. Do not use sharp metal objects or
abrasive detergents on the vitreous enamel coated surface.
Ÿ After cleaning recondition the surface with a light wipe of oil.
Ÿ Remove the fat from the moat of the Burner Pan (F), wash it with warm water using a suitable non-abrasive detergent. Do not use sharp
metal objects or abrasive detergents.
For Grill2Braai & Paella Pan
Ÿ The grill plate is coated with a tough durable non-stick coating that has been used with great success on some of the best cookware in
the world. Nevertheless, taking care of it can help you to enjoy extra years of healthy, easy, non-stick cooking.
Ÿ Use only low or medium heat settings to help retain the valuable nutrients in the food and maintain the non-stick surface.
Ÿ Whilst the non-stick coating is very durable, it can easily be damaged by the use of metal cooking utensils. It is therefore recommended
that only plastic or wooden utensils be used when cooking.
Ÿ Do not overheat the grill plate and always add a little cooking oil to the surface before use.
Ÿ Always allow the grill plate to cool before immersing it in water.
Ÿ The use of abrasive detergents is not recommended, as this will permanently damage the non-stick surface.
Ÿ After cleaning recondition the surface with a light wipe of oil.
Ÿ Remove the fat from the moat of the Fat Pan.
Ÿ Note: For stubborn stains, oven cleaner may be used.
11. STORING AND CARRYING
Ÿ Always allow the unit to cool down before packing any part into its bag.
Ÿ Always store your CADAC Braai in the supplied bags, in a dry environment, preferably off the ground. This is especially important
for the Burner pan stored in the Main bag so as to prevent the ingress of dirt or insects that may affect the gas flow.
Ÿ Should the appliance operate abnormally after storage and all checks referred to in Sections 4 & 7 have not isolated any problem, the
Venturi may be blocked. A blocked Venturi would be indicated by a weaker yellowish flame or no flame at all in extreme cases. Under
these circumstances it will be necessary to remove the Burner (G) as described under Section 10 - General Maintenance, and to check
and thoroughly clean out any foreign matter which may have gathered in the Venturi.
12. RETURNING THE APPLIANCE FOR REPAIR OR SERVICE
Ÿ Do not modify the appliance, as this could be dangerous.
Ÿ If you cannot rectify a fault by following these instructions, contact your local CADAC distributor for details on how to return the product
for attention.
Ÿ Your CADAC Appliance is guaranteed by CADAC for a period of 2 years against factory fault.
13. SPARES AND ACCESSORIES
Ÿ Always use genuine CADAC spares as they have been designed to give optimum performance.
Fig. 9
SPARES
740-SP030
Jet No. 85 (I3B/P(30) & I3+(28-30/37))
740-SP015
Jet No. 74 (I3B/P(50)
8309-SP001
Pot/Paella Stand
8309-SP003
Burner Assembly
ACCESSORIES
346-10
Dual Power Pak
349
Vertical EN417 Regulator Assembly
98368
Pizza Stone
8309-SP006
Burner Pan Assembly
8154-6
1/4” BSP LH tailpiece and Nut
8309-SP002
Skottel
8309-100
Skottel
8309-SP005
8910-100
Grill2Braai
Pot Stand Rubber Feet
740-SP028
Jet No. 81 (I3B/P(37)
5758
Paella Pan 47
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cadac 8309 - Grill2Braai at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cadac 8309 - Grill2Braai in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cadac 8309 - Grill2Braai

Cadac 8309 - Grill2Braai User Manual - German - 10 pages

Cadac 8309 - Grill2Braai User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info