632516
3
Zoom out
Zoom in
Previous page
1/12
Next page
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the contents
listed. Do not proceed with assembly if any parts are missing;
contact Burley immediately for replacement parts.
Hardware Bag Contents
Reflectors: Quick-Release Levers:
(2) Front reflector, clear (2) Quick-release lever
(2) Rear reflector, red
(4) Self-tapping screw, reflector
Envelope: Tools Required:
Trailer Checklist 5/16", 8mm or small adjustable wrench
Warranty Card Small, straight blade screwdriver
Burley d’Lite Owner’s Instruction & Safety Manual
II. Mounting the Reflectors
1. With the trailer side panels in folded position locate one of the
black molded hinges (A) at the rear trailer corner.
2. At the top of the hinge locate the screw hole (B) and reflector
locating boss (C). Each reflector has a
screw hole (D) and a location
stub (E).
3. Take a red reflector
and screw it to the
hinge as shown in
the figure below.
Line the reflector
hole (D) up with the
hinge screw hole (B)
and the reflector stub
(E) with the hinge
locating boss (C).
4. Repeat the procedure
with the second red
reflector, on the other rear trailer
hinge.
5. In similar fashion, repeat steps 1
through 4 on the trailer front using
the two clear reflectors.
A
B
D
E
C
3
XIII. Parts List and Drawing
Note: Subassemblies are indented. Inquire for additional parts.
1 (1) Preassembled Main Frame Assembly
2 (1) Front Main Frame, 1" Aluminum Tube
3 (1) Rear Main Frame, 1" Aluminum Tube
4 (1) Left Inner Frame, 1" Aluminum Tube
5 (1) Right Inner Frame, 1" Aluminum Tube
6 (1) Bag Holder, 3/4" Aluminum Tube
7 (4) Wheel Dropout
8 (1) Roll Bar Assembly
9 (1) Roll Bar Receptacle, Plastic
10 (1) Roll Bar Hinge, Plastic
11 (1) Tongue and Hitch Assembly
12 (1) Tongue, 1 1/8" Aluminum Tube w/Bushing, Spindle &
Dropout
13 (1) Hitch w/Hitch Knob & Ball
14 (1) Hitch Safety Strap
15 (1) Clip & D-Ring
16 (1) Rubber Flex Connector
17 (1) Tongue Receptacle, Plastic
18 (2) Side Rail, 3/4" Aluminum Tube
19 (2) Holder for Child Seat Center Support Strap
20 (2) Pair Plastic Batten Connector (Front & Rear)
21 (2) Upper Aluminum Batten
22 (2) Lower Aluminum Batten
23 (2) Pair Side Rail Hinges, Per Side Rail
24 (10) Side Rail Snap Stud
25 (4) Reflector Bracket
26 (1) Fabric Bottom Bag and Side Panel Assembly w/Vinyl Win-
dows
& Side Pockets
27 (1) Fabric Child Seat with Harness
28 (1) Buckle for Lap Belt
29 (1) 2-Piece Safety Flag
30 (1) Bungee Cord
31 (1) Sunscreen Cover
32 (1) Hardware Bag containing:
33 (2) Front Reflector with Self-Tapping Screw
34 (2) Rear Reflector with Self-Tapping Screw
(2) Wheel Quick-Release Levers (not shown)
(2) Dished Wheels w/Quick-Release Seal-Mech Hubs (not
shown)
35 (1) Upper Buckle Strap
36 (1) Lower Buckle Strap
Options (at additional cost):
Flow-Thru 2-in-1 Cover (not shown)
Walk ’n Roller stroller kit (not shown)
22
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley D-lite 1996-2003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley D-lite 1996-2003 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info