632516

Burley D-lite 1996-2003 Manual

11
Zoom out
Zoom in
Previous page
1/12
Next page
.
Using the Recessed Helmet Pocket
The helmet pocket on the child seat is designed to provide added
room for the back side of a child's helmet. The seatback can be
modified by making the following adjustments:
• Loosen tension on upper buckle strap (B) located behind child
seat (illustration p. 10).
• Connect/tighten lower buckle strap (A) located behind child
seat (illustration p. 10).
The size and shape of the helmet pocket can be adjusted by adding/
subtracting tension from the upper buckle strap (B).
Using the Child Seat Divider
This feature is designed to provide additional comfort and structure
to the child seat by limiting two passengers from sliding to the center
of the seat.
• Connect center crotch strap O-ring to snap hook located on the
front splash guard.
• Seat divider strap tension can be adjusted using the plastic
slider on the crotch strap.
NOTE: We recommend that the Child Seat Divider feature be used when
transporting two (2) passengers only. Single passenger loads require
placing child in the center of the seat and use of the center crotch strap as
part of the safety harness.
11
VIII. Completing Assembly
At this time your trailer is nearly assembled. Snap the fabric tail gate
and splash guard to the upper snap studs on the side rails if you
haven’t already done so. NOTE: It’s easier to snap these when the
trailer is folded; they can remain snapped in place during folding
and unfolding.
The elastic bungee cord is handy for securing odd-sized loads. When
not in use, carry it by hooking it across the side rails in back. The
bungee cord is also intended to be used for strapping down the tongue
and hitch when the trailer is folded, to prevent the tongue from moving.
Pull it across the tongue and hook it to the bolts on the inner frame (near
the rear of the trailer).
X. Trailer Maintenance and Care
Hitch and Tongue Maintenance
Your trailer is designed for low maintenance and easy care. Clean
and grease the eyebolt threads on the hitch periodically to ensure
that the eyebolt knob can be properly tightened.
Because of ultraviolet degradation, we recommend that the hitch be
replaced every five years under normal use. In sunny or smoggy
locations or for trailers that are stored outdoors, the hitch should be
replaced every two to three years for safety. Replace your hitch or
tongue if there are any signs of damage—i.e., cracks, dents, scratches.
Your Burley d’lite trailer comes with an easy-to-lubricate tongue-
pivot spindle. Lubricate twice a year for normal use and monthly for
heavier use—i.e., use in wet or salty conditions.
1. Gently remove inner cap on the end of tongue
with a medium flat-blade screwdriver.
2. Using grease gun equipped with needle type
injector, squirt grease into small hole in brass
bushing until old grease flushes out ends of
bushing.
3. Replace inner cap on end of tongue to protect
pivot bushing from dirt and moisture.
IMPORTANT: For any spindle service other than lubrication, con-
tact your Burley Dealer.
Fabric Care
Your Burley d’Lite is manufactured from a tough, durable pack-
cloth. The nylon fabric is coated for waterproofness and is highly
resistant to fading. The fabric can be easily cleaned with any mild
soap or detergent and warm water. For more persistent soil, use a
nylon bristle brush. When not in use, store your trailer in a dry, well-
ventilated area; wipe it dry before storing to help avoid mildew.
Nylon fabric will eventually fade, especially when exposed to direct
sunlight. To extend the life of your fabric, as well as the hitch and
other components, do not store your trailer in direct sunlight. Do not
use bleach for cleaning, as it will damage the nylon. The nylon fabric
is an important part of your trailer’s structure, and provides a safety
envelope for child passengers. Replace any nylon fabric that is
ripped, scuffed, or otherwise damaged.
14
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley D-lite 1996-2003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley D-lite 1996-2003 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info